Summary for Test 2021-09-27-67-2

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 215638
DEA: 09387904
DIST-CO-RTE-PM09-INY-190-111.6/126.1
Award Date05/12/2021
Closeout Date01/18/2022
Work DescriptionPLACE HMA OVER EXISTING PAVEMENT.
Location DescriptionINYO COUNTY NEAR FURNACE CREEK FROM 0.1 MILE WEST OF BAD WATER ROAD TO 3.6 MILES EAST OF DANTE'S VIEW ROAD
QA Service Level1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date09/27/2021 Sample Unique Key67
Date that the sample was received by the laboratory/organization performing the testing10/25/2021 Sample typeDepartment Acceptance
A brief description of the sampleTEST Asphalt Binder, NO TEST 9/28, 9/29, 9/30, 10/4 The quantity of what the sample constitutes2 CANS
From where was the sample collectedSource First name of sampler or witnessed byWULFENSTEIN
Last name of sampler or witnessed byWULFENSTEIN Title of sampler
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameErgon
Transportation Laboratory (TL) Number661877 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 70-10
Modified Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierErgon Asphalt & Emulsions Incorporated - Las Vegas NV MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2021-09-27-67
DIME Test ID: 2021-09-27-67-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-11-05

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Erika Gonzalez
Date of test: 11/03/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.291 kPa
Phase Angle (δ) (for the 10 cycles): 85.6 degree
Complex Modulus (G*) (for the 10 measurements): 2.911 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 2.92 kPa
General comments (publicly viewable) (Max 1000 characters): per 2018 standard specifications RTFO

Test was verified on 11/5/2021 ✔