Summary for Test 2021-09-15-52-2
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 215537 DEA: 09387104 EFIS: 0920000052 |
|---|---|
| DIST-CO-RTE-PM | 09-MNO-158-6.0/15.8 |
| Award Date | 04/29/2021 |
| Closeout Date | 11/30/2021 |
| Work Description | PLACE HMA (TYPE A) OVER EXISTING PAVEMENT. |
| Location Description | MONO COUNTY NEAR JUNE LAKE FROM 0.1 MILE NORTH OF RUSH CREEK BRIDGE TO ROUTE 395 |
| QA Service Level | 1 (Verified on 07/02/2021) |
Sample Information
| Sample Taken Date | 09/15/2021 | Sample Unique Key | 52 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/20/2021 | Sample type | Department Acceptance |
| A brief description of the sample | BINDER | The quantity of what the sample constitutes | 2 CANS |
| From where was the sample collected | Source | First name of sampler or witnessed by | Unknown |
| Last name of sampler or witnessed by | Unknown | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | VALERO | |
| Transportation Laboratory (TL) Number | 661788 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 M |
|---|---|---|---|
| Modified | Yes | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set | |
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-09-15-52
DIME Test ID: 2021-09-15-52-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-11-04
Test Results
Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Juan Gomez
Date of test: 11/01/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.844 kPa
Phase Angle (δ) (for the 10 cycles): 59.3 degree
Complex Modulus (G*) (for the 10 measurements): 8.438 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 9.81 kPa
Stress Amplitude 2: 0.480 kPa
Phase Angle 2 (δ) (for the 10 cycles): 61.1 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 4.803 kPa
Test Temperature (Specimen 2): no data
Dynamic Shear 2, G*/sin(δ): 5.49 kPa
Delta at 2.2 kpa: 62.5 degree
General comments (publicly viewable) (Max 1000 characters): per 2018 Standard Specifications RTFO
Test was verified on 11/4/2021 ✔