Summary for Test 2015-12-29-4-1
Test performed: ASTM A370-15Project Information
| Project Identifiers | Project ID: 7285 DEA: 040120T4 EFIS: 0400000027 |
|---|---|
| DIST-CO-RTE-PM | 04-SF-80-12.6/13.9 |
| Award Date | 11/27/2012 |
| Closeout Date | 02/12/2025 |
| Work Description | CONSTRUCT BRIDGE, ROADWAYS, ELECTRICAL, BUILDINGS AND REMOVE BRIDGES |
| Location Description | THE CITY AND COUNTY OF SAN FRANCISCO FROM THE YERBA BUENA TUNNEL TO 1.3 KM EAST OF THE YERBA BUENA TUNNEL |
| QA Service Level | 1 (Verified on 10/29/2012) |
Sample Information
| Sample Taken Date | 12/29/2015 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/29/2015 | Sample type | Quality Assurance |
| A brief description of the sample | Flat Bar | The quantity of what the sample constitutes | 2 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Dong |
| Last name of sampler or witnessed by | Jun Shin | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Kyungin Industries |
| Transportation Laboratory (TL) Number | Unknown | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM6 - Steel Check Sample Plate | Heat Number(s) | 416820 , 141231 |
|---|---|---|---|
| Material Specification | A36 | Grade | 36 |
| Thickness | 4.5mm 3mm | Shape | Flat Bar |
| Metal Foundry Manufacturer (Mill) | Korea Steel Sangwon Steel | Plate Dimension | 25mm x 12in |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2015-12-29-4
DIME Test ID: 2015-12-29-4-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Flat Sample)
Test Release Date: 2016-01-07
Test Results
Number of Samples: 2
Input Type: Calculated
Tester's full name: Fred
Date of test: 01/05/2016
UTM: 67KIP
Temperature: 72 F
| Num | Sample | Heat Number | Width (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Total Elongation (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 141231 | 0.505 | 0.0571 | 51553 | 72715 | 31.3 | Fred | |
| 2 | 416820 | 0.505 | 0.0864 | 49324 | 65035 | 37.2 | Fred |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 1/7/2016 ✔