Summary for Test 2021-06-03-20-2
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 215245 DEA: 021J4504 EFIS: 0220000080 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-89-14.0/19.0 |
| Award Date | 12/08/2020 |
| Closeout Date | 09/27/2021 |
| Work Description | PLACE HMA (TYPE A). |
| Location Description | SISKIYOU COUNTY ABOUT 6 MILES NORTH OF BARTLE FROM 0.4 MILE NORTH OF EDISON CREEK ACCESS ROAD TO 2.0 MILES SOUTH OF MUD CREEK BRIDGE |
| QA Service Level | 1 (Verified on 10/23/2020) |
Sample Information
| Sample Taken Date | 06/03/2021 | Sample Unique Key | 20 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/04/2021 | Sample type | Department Acceptance |
| A brief description of the sample | Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25 RAP and virgin PG 58-34 M from Valero - Benicia | The quantity of what the sample constitutes | 750 Tons |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | John |
| Last name of sampler or witnessed by | Carmichael | Title of sampler | Consultant |
| Telephone number of sampler | Laboratory sample identification | D78830 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | JF Shea Construction - Fawndale Rock and Asphalt - Redding | |
| Transportation Laboratory (TL) Number | 779368 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/8 inch | Lot number | Unknown |
| Sublot number | Unknown | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-06-03-20
DIME Test ID: 2021-06-03-20-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2021-10-29
Test Results
What temperature unit is used?: Fahrenheit
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/07/2021
Test procedure used?: Method A
Mass of the specimen basket assembly: no data
Mass of the specimen and specimen basket assembly prior to ignition: no data
Mass of HMA Sample prior to ignition: 1320.0 g
Mass Loss: no data
Mass of aggregate remaining after ignition: 1241.4 g
Correction Factor (Percent by mass of HMA Specimen): 0.40 %
Moisture Content: 0.00 %
Temperature Compensation Factor: no data
Test Temperature: 1000 F
Corrected Asphalt Binder Content: 5.55 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/29/2021 ✔