Summary for Test 2021-10-20-21-1
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 213521 DEA: 050L7234 EFIS: 0515000099 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-58-3.08 |
| Award Date | 06/25/2020 |
| Closeout Date | 08/23/2023 |
| Work Description | TROUT CREEK BRIDGE REPLACEMENT |
| Location Description | IN SAN LUIS OBISPO COUNTY ON HWY 58 EAST OF SANTA MARGARITA AT TROUT CREEK BRIDGE (BR NO. 49-0091). |
| QA Service Level | 1 (Verified on 09/30/2019) |
Sample Information
| Sample Taken Date | 10/20/2021 | Sample Unique Key | 21 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/20/2021 |
| Sample type | Quality Assurance | A brief description of the sample | A449 ATR with Coupling Nut |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Alex | Last name of sampler or witnessed by | Martinez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | BSMI | Transportation Laboratory (TL) Number | C918914 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 10648850 | Nut Mfg. Lot Number(s) | S01210302H |
| Washer Mfg. Lot Number(s) | Bolt Specification | None | |
| Bolt Length(s) | Nut Specification | A563 Coupling Nut | |
| Washer Specification | None | Finish | F2329 |
| Diameter/Size | Bolt Mfg. Lot Number | 2103153-20 | |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-10-20-21
DIME Test ID: 2021-10-20-21-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2021-10-26
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: fsaylor
Date of test: 10/22/2021
UTM: 400kip
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | UNC 7/8 | 0.462 | 62983 | 280 | 136247 | 122845 | 56755 | Nut Broke in Half |
General comments (publicly viewable) (Max 1000 characters): Nut Broke in Half
Test Graph
Source: Bluehill Data Point FileTest was verified on 10/26/2021 ✔