Summary for Test 2021-10-07-33-1
Test performed: CTM 212-May 2010Project Information
| Project Identifiers | Project ID: 215403 DEA: 021H4004 EFIS: 0216000042 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-5-R8.3 |
| Award Date | 03/02/2021 |
| Closeout Date | 02/28/2022 |
| Work Description | PLACE STRUCTURAL CONCRETE BRIDGE DECK AND BARRIER AND PLACE HMA. |
| Location Description | SISKIYOU COUNTY NEAR MOUNT SHASTA AT AZALEA ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 01/07/2021) |
Sample Information
| Sample Taken Date | 10/07/2021 | Sample Unique Key | 33 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/09/2021 | Sample type | Department Acceptance |
| A brief description of the sample | Class 2 Aggregate Base | The quantity of what the sample constitutes | 2 bags for unit weight |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Karl |
| Last name of sampler or witnessed by | Huntman | Title of sampler | JET |
| Telephone number of sampler | Laboratory sample identification | D78955 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Mountain Gate Quarry | |
| Transportation Laboratory (TL) Number | 853081 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0001 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile | |
| Where the material sample would have been placed if not sampled | 02 SIS 5 | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | Unknown | |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-10-07-33
DIME Test ID: 2021-10-07-33-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2021-10-21
Test Results
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 10/11/2021
Which procedure was used to fill the measure with aggregate?: no data
Weight of water in the measure: 21.05 lbm
Water temperature: 72 deg F
Tare weight of empty measure: 12.973 lbm
Weight of measure filled with aggregate (test 1): 38.596 lbm
Weight of measure filled with aggregate (test 2): 38.689 lbm
Weight of measure filled with aggregate (test 3): 38.665 lbm
Water density: 62.28 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 25.62 lbm
Net weight of aggregate in measure (test 2): 25.72 lbm
Net weight of aggregate in measure (test 3): 25.69 lbm
Average net weight of aggregate required to fill the measure: 25.68 lbm
Aggregate unit weight: 75.98 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/21/2021 ✔