Summary for Test 2021-05-25-42-5
Test performed: ASTM C39-18Project Information
| Project Identifiers | Project ID: 215462 DEA: 080C8704 EFIS: 0800000064 COOP: 081687 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-SR 60-R2.08/2.80 |
| Award Date | 11/20/2020 |
| Closeout Date | Not set |
| Work Description | The project scope of work is widening approximately .7 miles of SR-60 at Central Avenue to accommodate three through-lanes with provisions for a future lane, two left-turn lanes, standard shoulders, bike path, and sidewalk in both the northbound and southbound directions |
| Location Description | Project Limits are SR-60 from 0.3 miles west to 0.4 miles east of Central Ave. PM 2.08/2.80 in Chino. |
| QA Service Level | 2 (Verified on 01/18/2021) |
Sample Information
| Sample Taken Date | 05/25/2021 | Sample Unique Key | 42 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/26/2021 |
| Sample type | Quality Control | A brief description of the sample | 6 X12 Concrete Cylinders |
| The quantity of what the sample constitutes | 35 CY | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Stephen | Last name of sampler or witnessed by | Haynes |
| Title of sampler | Telephone number of sampler | 9253317125 | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | KIE-CON, INC | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | K6080-603 CPA |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 110302 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | 20-121 5/25/2021 | |
| A detailed description of where the material sample was collected | Concrete sample from wheelbarrow | Where the material sample would have been placed if not sampled | Wide Flange Girder |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-05-25-42
DIME Test ID: 2021-05-25-42-5
Testing Lab: Kie-Con, Incorporated - Antioch
Test Method: ASTM C39-18: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2021-10-04
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Stephen Haynes
Date of test: 06/23/2021
Average diameter of cylinder 1: 6.00 in
Average diameter of cylinder 2: 6.00 in
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Maximum load on cylinder 1: 261720 lb
Maximum load on cylinder 2: 269190 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Age of specimen: 29 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 28.27 in^2
Cross sectional area of cylinder 2: 28.27 in^2
Compressive strength (to nearest 10 psi): 9390 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/4/2021 ✔