Summary for Test 2021-09-13-17-3
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 213337 DEA: 024F5404 EFIS: 0213000004 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-5-R15.3/R16.5 |
| Award Date | 07/30/2018 |
| Closeout Date | 05/23/2022 |
| Work Description | BRIDGE REPLACEMENT - SOUTHBOUND ONLY |
| Location Description | SISKIYOU COUNTY NEAR WEED FROM 0.1 MILE SOUTH OF DEETZ ROAD UNDERCROSSING TO 0.6 MILE NORTH OF BLACK BUTTE OVERHEAD 02-0004L |
| QA Service Level | 1 (Verified on 11/14/2018) |
Sample Information
| Sample Taken Date | 09/13/2021 | Sample Unique Key | 17 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/13/2021 | Sample type | Department Acceptance |
| A brief description of the sample | 3/8 inch RAP | The quantity of what the sample constitutes | PSE 1 Bag at 282 Tons |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Derrick |
| Last name of sampler or witnessed by | Curry | Title of sampler | Materials Tester |
| Telephone number of sampler | Laboratory sample identification | D78942 | |
| Linked DIME Sample ID | 2021-09-13-16, 2021-09-13-18 | The fabricator/manufacturer/facility name | J F Shea Construction Inc - Fawndale Rock and Asphalt - Redding CA |
| Transportation Laboratory (TL) Number | 815603 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Fawndale Rock and Asphalt, Redding, CA |
|---|---|---|---|
| Aggregate Size | 3/8 inch | Aggregate Source | Fawndale Rock and Asphalt, Redding, Ca |
| RAP Stockpile | Continuous | Stockpile Size (tons) | Unknown |
| Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-09-13-17
DIME Test ID: 2021-09-13-17-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2021-09-16
Test Results
Does this test use 1/4 sieve?: Yes
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Colt Sweeny
Date of test: 09/15/2021
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1328.1 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 1.5 grams | 99.9 % | |||||
| 180.3 grams | 86.4 % | |||||
| 363.8 grams | 72.6 % | |||||
| 682.5 grams | 48.6 % | |||||
| 870.7 grams | 34.4 % | |||||
| 990.3 grams | 25.4 % | |||||
| 1076.7 grams | 18.9 % | |||||
| 1139.7 grams | 14.2 % | |||||
| 1181.4 grams | 11.1 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/16/2021 ✔