Summary for Test 2021-08-25-37-3
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 215615 DEA: 101L2304 EFIS: 1020000163 |
|---|---|
| DIST-CO-RTE-PM | 10-SJ-4-5.4/13.4 |
| Award Date | 05/05/2021 |
| Closeout Date | 01/31/2022 |
| Work Description | COLD PLANE ASPHALT CONCRETE PAVEMENT AND RESURFACE WITH HMA AND RHMA. |
| Location Description | SAN JOAQUIN COUNTY NEAR STOCKTON FROM 1 MILE EAST OF MIDDLE RIVER BRIDGE TO 0.1 MILE WEST OF JOHN TURK ROAD |
| QA Service Level | 1 (Verified on 04/21/2021) |
Sample Information
| Sample Taken Date | 08/25/2021 | Sample Unique Key | 37 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/07/2021 | Sample type | Department Acceptance |
| A brief description of the sample | Asphalt Rubber Binder | The quantity of what the sample constitutes | 1 of 2 cans |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | J |
| Last name of sampler or witnessed by | Kort | Title of sampler | CONSTR INSP |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | George Reed - Clements Plant | |
| Transportation Laboratory (TL) Number | C035044 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-10 |
|---|---|---|---|
| Modified | No | Lot number | 1 |
| Sublot number | 1 | Tank number | |
| Time of sample | HMA Supplier | George Reed - Clements | |
| Certified Asphalt Supplier | VSS Emultech - West Sacramento CA | Multigrade | Yes |
| Multigrade Type | PG 64-16 / PG 64-10 | Asphalt Binder Mix Number | Not set |
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-08-25-37
DIME Test ID: 2021-08-25-37-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-09-20
Test Results
Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 09/13/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.326 kPa
Phase Angle (δ) (for the 10 cycles): 79.0 degree
Complex Modulus (G*) (for the 10 measurements): 3.255 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 3.32 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications RTFO
Test was verified on 9/20/2021 ✔