DIME - Test Summary

Summary for Test 2021-09-02-20-1

Test performed: CTM 202-November 2011

Project Identifiers	Project ID: 212496 DEA: 024E4504 EFIS: 0200020286
DIST-CO-RTE-PM	02-LAS,MOD-139,299-VAR
Award Date	07/28/2020
Closeout Date	08/14/2023
Work Description	PLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS.
Location Description	LASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87
QA Service Level	1 (Verified on 06/06/2017)

Sample Taken Date	09/02/2021	Sample Unique Key	20
Date that the sample was received by the laboratory/organization performing the testing	09/04/2021	Sample type	Department Acceptance
A brief description of the sample	Shoulder Backing	The quantity of what the sample constitutes	3000 tons or Day's Placement
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	E.
Last name of sampler or witnessed by	Chavez	Title of sampler	Materials Tester
Telephone number of sampler		Laboratory sample identification	D78938
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Hat Creek Construction and Materials - Shaw Pit Facility - Lookout, CA
Transportation Laboratory (TL) Number	848963	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-25-0008
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile at the Plant
Where the material sample would have been placed if not sampled	02 LAS MOD 139 299 VAR	Primary Aggregate Nominal Size	1 inch
The concrete mix design number		Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2021-09-02-20

DIME Test ID: 2021-09-02-20-1

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates

Test Release Date: 2021-09-09

What size aggregate is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Individual Mass Retained

For Combined Gradation only, has the fine aggregate sample been reduced?: No

For Combined Gradation only, use #40 Sieve?: No

Input Type: Measured

Tester's full name: Terry McCormick

Date of test: 09/06/2021

Sieve Size	Individual Mass Retained	Cumulative Percent Passing
Total mass of sample prior to washing	grams
3 in. sieve	0.0 grams	100 %
2 1/2 in. sieve	0.0 grams	100 %
2 in. sieve	0.0 grams	100 %
1 1/2 in. sieve	0.0 grams	100 %
1 in. sieve	767.0 grams	94 %
3/4 in. sieve	1175.0 grams	84 %
1/2 in. sieve	1998.0 grams	66.6 %
3/8 in. sieve	1258.0 grams	56 %
#4 sieve	2267.0 grams	37 %
#8 sieve	125.1 grams	27 %
#16 sieve	77.0 grams	22 %
#30 sieve	50.2 grams	18 %
#50 sieve	34.6 grams	15 %
#100 sieve	30.8 grams	13 %
#200 sieve	27.8 grams	10.5 %
Individual mass retained on the pan	137.6 grams

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/9/2021 ✔