DIME - Test Summary

Summary for Test 2021-08-25-6-5

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213469 DEA: 024C40V4 EFIS: 0218000125
DIST-CO-RTE-PM	02-SHA-5-R3.8/R11.7
Award Date	11/06/2018
Closeout Date	08/16/2023
Work Description	WIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB
Location Description	SHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING
QA Service Level	1 (Verified on 12/31/2018)

Sample Taken Date	08/25/2021	Sample Unique Key	6
Date that the sample was received by the laboratory/organization performing the testing	08/25/2021	Sample type	Department Acceptance
A brief description of the sample	Combined Virgin Aggregate	The quantity of what the sample constitutes	100k Ton Milestone
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	JD
Last name of sampler or witnessed by	Atkinson	Title of sampler	Materials Tester
Telephone number of sampler		Laboratory sample identification	D78930
Linked DIME Sample ID		The fabricator/manufacturer/facility name	J F Shea Construction Inc - Fawndale Rock and Asphalt - Redding CA
Transportation Laboratory (TL) Number	858989	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0017
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Laboratory batched from untreated virgin sized aggregate stockpile
Where the material sample would have been placed if not sampled	02 SHA 5	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Not Applicable	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2021-08-25-6

DIME Test ID: 2021-08-25-6-5

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-09-09

Input Type: Measured

Tester's full name: Terry McCormick

Date of test: 09/01/2021

Mass of saturated surface dry sample (before pycnometer) (S)	509.6 grams
Mass of the pycnometer with water and aggregate (C)	988.8 grams
Mass of the pycnometer with water (B)	662.9 grams
Mass of the oven dried sample (before pycnometer) (A)	500.1 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	509.6 grams
Mass of the oven dry aggregate (for absorption) (A)	500.1 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.722
Bulk specific gravity (SSD Basis)	2.774
Apparent specific gravity	2.871
Absorption	1.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/9/2021 ✔