Summary for Test 2021-08-26-3-4
Test performed: ASTM F606-14aProject Information
| Project Identifiers | Project ID: 211848 DEA: 112T2174 EFIS: 1116000131 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-R37.4 - R46.5 |
| Award Date | 12/22/2016 |
| Closeout Date | 05/01/2026 |
| Work Description | (Alternative Delivery) CMGC, San Elijo Highway Bridge Replacement. Replace the San Elijo lagoon highway bridge, construct HOV lanes, construct bike and pedestrian trails and bridge, build multi-use facility at Manchester Ave. |
| Location Description | IN SAN DIEGO COUNTY IN SOLANA BEACH AND ENCINITAS FROM 0.1 MILE NORTH OF LOMAS SANTA FE DRIVE OVERCROSSING TO 0.2 MILE SOUTH OF BIRMINGHAM DRIVE OVERCROSSING |
| QA Service Level | 1 (Verified on 01/31/2017) |
Sample Information
| Sample Taken Date | 08/26/2021 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/01/2021 | Sample type | Quality Assurance |
| A brief description of the sample | U-bolt with HHN and Acorn Nuts | The quantity of what the sample constitutes | 1 lot of 450 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Stacey |
| Last name of sampler or witnessed by | Davis | Title of sampler | QAI |
| Telephone number of sampler | 5624806984 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Portland Bolt - Oregon | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | B362-035-21 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | Not applicable |
|---|---|---|---|
| Heat Number(s) | 10712390 Bolt, 6215287403 HHN, 194689 Acorn Nut | Nut Mfg. Lot Number(s) | 33753 |
| Washer Mfg. Lot Number(s) | not applicable | Bolt Specification | ASTM A193B7 |
| Bolt Length(s) | 9-1/2" | Nut Specification | ASTM A194 Grade 2H |
| Washer Specification | ASTM A29 | Finish | HDG |
| Diameter/Size | 5/8" x 9-1/2" x 3-3/8" x 4" | Bolt Mfg. Lot Number | not applicable |
| Rocap Test Requirement(s) | Not applicable | Lubricant Requirements(s) | Yes |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-08-26-3
DIME Test ID: 2021-08-26-3-4
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Test Release Date: 2021-09-02
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name:
Date of test: 09/02/2021
UTM: 400kip
Temperature: 72 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By |
|---|---|---|---|---|---|---|---|
| 1 | 1A | 33753-6215287403 | 39618 | A194 |
General comments (publicly viewable) (Max 1000 characters): A194
Test Graph
Source: Bluehill Data Point File
WARNING: time or load not found in data points imported from Instron machine.
Test was verified on 9/2/2021 ✔