Summary for Test 2021-07-26-37-4

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 215536
DEA: 09383504
EFIS: 0920000044
DIST-CO-RTE-PM09-MNO-395-R40.1/R44.8
Award Date05/13/2021
Closeout Date11/30/2021
Work DescriptionPLACE HMA OVER EXISTING PAVEMENT.
Location DescriptionMONO COUNTY ABOUT 7 MILES SOUTH OF LEE VINING FROM 0.2 MILE SOUTH OF ROUTE 158 TO 0.6 MILE NORTH OF LA AQUEDUCT BRIDGE
QA Service Level1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date07/26/2021 Sample Unique Key37
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/13/2021
Sample typeDepartment Acceptance A brief description of the samplePG58-34M
The quantity of what the sample constitutes1 can From where was the sample collectedManufacturer
First name of sampler or witnessed by_ Last name of sampler or witnessed by_
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Formc661389 Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierPNAC LLC - Fernley NV MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-07-26-37
DIME Test ID: 2021-07-26-37-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-08-26

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Erika Gonzalez
Date of test: 08/17/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.316 kPa
Phase Angle (δ) (for the 10 cycles): 60.4 degree
Complex Modulus (G*) (for the 10 measurements): 3.161 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 3.64 kPa
General comments (publicly viewable) (Max 1000 characters): per 2018 standard specifications RTFO

Test was verified on 8/26/2021