DIME - Test Summary

Summary for Test 2021-05-05-38-7

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213411 DEA: 030H10U4 EFIS: 0317000246
DIST-CO-RTE-PM	03-SAC-5-9.7/24.9
Award Date	05/01/2019
Closeout Date	02/22/2024
Work Description	Not set
Location Description	Construction on state highway in Sacramento County in and near Sacramento from 1.1 miles south of Elk Grove Boulevard to American River Viaduct
QA Service Level	1 (Verified on 07/19/2019)

Sample Taken Date	05/05/2021	Sample Unique Key	38
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/09/2021
Sample type	Verification	A brief description of the sample	3/4" untreated Virgin Aggregate
The quantity of what the sample constitutes	2 Bags	From where was the sample collected	Supplier
First name of sampler or witnessed by	J.	Last name of sampler or witnessed by	Buscheck
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Teichert Perkins Drum Plant	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-34-0045::ASPEN IV SOUTH
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	belt feed
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-05-05-38

DIME Test ID: 2021-05-05-38-7

Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-08-13

Input Type: Measured

Tester's full name: Tom Stinnett

Date of test: 06/14/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 958.7 grams

Mass of the pycnometer with water (B): 644.1 grams

Mass of the oven dried sample (before pycnometer) (A): 491.3 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 491.3 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.650

Bulk specific gravity (SSD Basis): 2.697

Apparent specific gravity: 2.780

Absorption: 1.8 %

General comments (publicly viewable) (Max 1000 characters): JMF 21-023

Test was verified on 8/13/2021 ✔