DIME - Test Summary

Summary for Test 2021-08-05-11-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214921 DEA: 09367404 EFIS: 0916000025
DIST-CO-RTE-PM	09-KER-14-R4.7/R12.6
Award Date	Not set
Closeout Date	01/23/2023
Work Description	CONSTRUCT CRCP OVER EXISTING PAVEMENT AND PLACE HMA.
Location Description	KERN COUNTY AT AND NEAR ROSAMOND AND MOJAVE FROM 1.4 MILES SOUTH OF DAWN ROAD OVERCROSSING TO 0.5 MILE NORTH OF SILVER QUEEN ROAD OVERCROSSING
QA Service Level	1 (Verified on 11/06/2020)

Sample Taken Date	08/05/2021	Sample Unique Key	11
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/06/2021
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA-A-SP R25, 0.8% Dry Lime
The quantity of what the sample constitutes	2 Bags Lime Treated, 2 Bags of Virgin, 1 Bag of RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Eric	Last name of sampler or witnessed by	Wheeler
Title of sampler		Telephone number of sampler
Laboratory sample identification	0447A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite Big Rock	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0046, 91-19-0008
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R25	The fabricator/manufacturer designation for the sample
The plant number	13554	A detailed description of where the material sample was collected	Belt Cut at Granite Big Rock Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-08-05-11

DIME Test ID: 2021-08-05-11-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-08-13

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 08/11/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 969.5 grams

Mass of the pycnometer with water (B): 653.3 grams

Mass of the oven dried sample (before pycnometer) (A): 496.7 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 496.7 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.702

Bulk specific gravity (SSD Basis): 2.720

Apparent specific gravity: 2.752

Absorption: 0.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/13/2021 ✔