Summary for Test 2021-03-16-14-3
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 99999 DEA: 0322222 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 03/16/2021 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/15/2021 |
| Sample type | Quality Control | A brief description of the sample | test |
| The quantity of what the sample constitutes | 1 can each, *Test20, 17(037386),18(037387),19(037388), 20(037389) | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | test | Last name of sampler or witnessed by | tests |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | System Test | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-28 |
|---|---|---|---|
| Modified | Lot number | ||
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | PNAC LLC - Fernley NV | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-03-16-14
DIME Test ID: 2021-03-16-14-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2026-04-06
Test Results
Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Juan Gomez
Date of test: 08/05/2021
Test Plate Diameter: no data
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.311 kPa
Phase Angle (δ) (for the 10 cycles): 65.2 degree
Complex Modulus (G*) (for the 10 measurements): 3.109 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 3.42 kPa
Stress Amplitude 2: 0.188 kPa
Phase Angle 2 (δ) (for the 10 cycles): 66.9 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 1.879 kPa
Test Temperature (Specimen 2): no data
Dynamic Shear 2, G*/sin(δ): 2.04 kPa
Delta at 2.2 kpa: 63.1 degree
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/6/2026 ✔