Summary for Test 2015-09-02-9-1
Test performed: ASTM C39-17aProject Information
| Project Identifiers | Project ID: 209680 DEA: 07295504 EFIS: 0713000014 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-101-1.8/8.4 |
| Award Date | 09/15/2014 |
| Closeout Date | 06/22/2017 |
| Work Description | REPLACE PCC PAVEMENT AND COLD PLANE AND OVERLAY. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES FROM BEAUDRY AVENUE UNDERCROSSING TO 0.4 MILE NORTH OF PILGRIMAGE OVERCROSSING |
| QA Service Level | 1 (Verified on 08/01/2014) |
Sample Information
| Sample Taken Date | 09/02/2015 | Sample Unique Key | 9 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/04/2015 | Sample type | Quality Control |
| A brief description of the sample | 6X12 | The quantity of what the sample constitutes | 2 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | MARC |
| Last name of sampler or witnessed by | TALAVERA | Title of sampler | CALTRANS METS QA INSPECTOR |
| Telephone number of sampler | 562 449 800 | Laboratory sample identification | 914-01 |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | ROBERTSONS |
| Transportation Laboratory (TL) Number | L86 PCPH 001 | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | REPLACE PCC PAVEMENT COLD PLANE | Structure name | BED B2C FORM 11 |
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | RRM 14062 |
|---|---|---|---|
| The truck number from where the sample was collected | 14 | The batch plant ticket number from where the sample was collected | 1138155 |
| Concrete batch plant | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| A detailed description of where the material sample was collected | TRUCK MIXER | Where the material sample would have been placed if not sampled | Unknown |
| From Lot No. | Not set | Bag Lot No. | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2015-09-02-9
DIME Test ID: 2015-09-02-9-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2015-09-16
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: Matthew Clayton
Date of test: 09/16/2015
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.02 in
Average diameter of cylinder 2: 6.02 in
Maximum load on cylinder 1: 152960 lb
Maximum load on cylinder 2: 156490 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: no data
Age of specimen: 14 days
Age of specimen in hours: no data
Cross sectional area of cylinder 1: 28.46 in^2
Cross sectional area of cylinder 2: 28.46 in^2
Compressive strength of cylinder 1: 5374.6 psi
Compressive strength of cylinder 2: 5498.6 psi
Compressive strength (to nearest 10 psi): 5440 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/16/2015 ✔