DIME - Test Summary

Summary for Test 2021-04-23-22-2

Test performed: AASHTO T104-99r16

Project Identifiers	Project ID: 215251 DEA: 021J4604 EFIS: 0220000081
DIST-CO-RTE-PM	02-SIS-96-34.5/38.8,88.0/92.0
Award Date	02/02/2021
Closeout Date	09/27/2021
Work Description	HMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE.
Location Description	SISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE
QA Service Level	1 (Verified on 10/30/2020)

Sample Taken Date	04/23/2021	Sample Unique Key	22
Date that the sample was received by the laboratory/organization performing the testing	04/23/2021	Sample type	Verification
A brief description of the sample	Dust Sized Untreated Aggregate	The quantity of what the sample constitutes	JMF Verification
From where was the sample collected	Source	First name of sampler or witnessed by	Devin
Last name of sampler or witnessed by	Owens	Title of sampler	PEI
Telephone number of sampler		Laboratory sample identification	D78785C
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Shasta Ranch Aggregates - Anderson, CA
Transportation Laboratory (TL) Number	858622	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Sized Untreated Stockpile
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	fine
The concrete mix design number	JMF 21-05-S01	Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-04-23-22

DIME Test ID: 2021-04-23-22-2

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)

Test Release Date: 2021-07-22

Percentage of the total sample represented by each size

Size of aggregate being tested: Fine Aggregate

What type of solution was used?: Sodium sulfate

What was the condition of the solution?: Freshly prepared

Number of immersion cycles performed: 5

Input Type: Calculated

Tester's full name: Bang Nguyen

Date of test: 07/22/2021

Percentage of ⅜ inch x No. 4 material loss: 0 %

Percentage of No. 4 x 8 material loss: 3.6 %

Percentage of No. 8 x 16 material loss: 1 %

Percentage of No. 16 x 30 material loss: 1 %

Percentage of No. 30 x 50 material loss: 1.2 %

Fine weighted average loss: 2 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/22/2021 ✔