Summary for Test 2021-06-21-28-2
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 215251 DEA: 021J4604 EFIS: 0220000081 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-96-34.5/38.8,88.0/92.0 |
| Award Date | 02/02/2021 |
| Closeout Date | 09/27/2021 |
| Work Description | HMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE. |
| Location Description | SISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE |
| QA Service Level | 1 (Verified on 10/30/2020) |
Sample Information
| Sample Taken Date | 06/21/2021 | Sample Unique Key | 28 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/21/2021 | Sample type | Department Acceptance |
| A brief description of the sample | 16 boxes of Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 24.0% RAP and virgin PG 58-34 M binder from Valero - Benicia | The quantity of what the sample constitutes | Production Start-Up Evaluation |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Devin |
| Last name of sampler or witnessed by | Owens | Title of sampler | PEI |
| Telephone number of sampler | Laboratory sample identification | D78849 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Tullis - Northstate Asphalt - Redding, CA | |
| Transportation Laboratory (TL) Number | 853077 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/8 inch | Lot number | Unknown |
| Sublot number | Unknown | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-06-21-28
DIME Test ID: 2021-06-21-28-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2022-01-25
Test Results
What temperature unit is used?: Fahrenheit
Input Type: Calculated
Tester's full name: Karen Dorado
Date of test: 06/22/2021
Test procedure used?: no data
Mass of HMA Sample prior to ignition: no data
Mass Loss: no data
Correction Factor (Percent by mass of HMA Specimen): 0.52 %
Moisture Content: no data
Temperature Compensation Factor: no data
Test Temperature: no data
Corrected Asphalt Binder Content: 6.12 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/25/2022 ✔