Summary for Test 2021-05-06-27-3
Test performed: AASHTO T209-12Project Information
| Project Identifiers | Project ID: 214874 DEA: 022H0504 EFIS: 0216000093 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-36-R34.8/R35.4 |
| Award Date | 05/27/2020 |
| Closeout Date | 09/27/2021 |
| Work Description | REALIGN ROADWAY, DRAINAGE, GUARDRAIL, AND EROSION CONTROL. |
| Location Description | TRINITY COUNTY ABOUT 15 MILES WEST OF PLATINA FROM 3.6 MILES TO 2.9 MILES WEST OF HAYFORK CREEK BRIDGE. |
| QA Service Level | 1 (Verified on 05/26/2020) |
Sample Information
| Sample Taken Date | 05/06/2021 | Sample Unique Key | 27 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/06/2021 | Sample type | Department Acceptance |
| A brief description of the sample | 1/2-inch RAP (Combined, 5/8" Minus) | The quantity of what the sample constitutes | Production Start-Up Evaluation |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Cindy |
| Last name of sampler or witnessed by | Bryant | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | D78792B | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Knife River Construction - Orland Plant | |
| Transportation Laboratory (TL) Number | 768790 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | KRC Orland |
|---|---|---|---|
| Aggregate Size | 1/2-inch | Aggregate Source | |
| RAP Stockpile | Stockpile Size (tons) | ||
| Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-05-06-27
DIME Test ID: 2021-05-06-27-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2021-07-02
Test Results
Number of tests: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Darrell Valasek
Date of test: 05/10/2021
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7336.6 grams
Mass of oven-dry sample in air for Sample 1: 1675.5 grams
Mass of container filled with the sample and water for Sample 1: 8362.1 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.578
Theoretical maximum density at 25°C (77°F): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/2/2021 ✔