Summary for Test 2021-06-10-28-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 214190 DEA: 024G41U4 EFIS: 0218000047 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS,SIS-5-Var |
| Award Date | 08/26/2019 |
| Closeout Date | 11/24/2021 |
| Work Description | REPLACE REINFORCED CONCRETE BRIDGES & CONSTRUCT RETAINING WALL. |
| Location Description | SHASTA AND SISKIYOU COUNTIES ABOUT 7 MILES NORTH OF POLLARD FLAT FROM 0.8 MILE SOUTH TO 0.7 MILE NORTH OF SIMS ROAD UNDERCROSSING AND FROM 0.6 MILE SOUTH OF CASTLE CRAGS DRIVE UNDERCROSSING TO 0.2 MILE SOUTH OF SOUTH DUNSMUIR UNDERCROSSING |
| QA Service Level | 1 (Verified on 07/09/2019) |
Sample Information
| Sample Taken Date | 06/10/2021 | Sample Unique Key | 28 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/10/2021 | Sample type | Department Acceptance |
| A brief description of the sample | Combined Lime Treated Virgin 3/4-inch Type A Aggregate from cold feed at 150 tons | The quantity of what the sample constitutes | Production Start-Up Evaluation |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Derrick |
| Last name of sampler or witnessed by | Curry | Title of sampler | CGI |
| Telephone number of sampler | Laboratory sample identification | D78839A | |
| Linked DIME Sample ID | 2021-06-10-29 | The fabricator/manufacturer/facility name | J F Shea Construction - Fawndale Rock and Asphalt - Redding, CA |
| Transportation Laboratory (TL) Number | 779375 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0017 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Cold Feed Sampling Device at Plant |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | Unknown | |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-06-10-28
DIME Test ID: 2021-06-10-28-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2021-12-24
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/14/2021
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 4529.1 grams | ||||||
| grams | % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 34.0 grams | 99.2 % | |||||
| 980.0 grams | 78.4 % | |||||
| 1589.0 grams | 64.9 % | |||||
| 2236 grams | 50.6 % | |||||
| 2566.0 grams | 43.3 % | |||||
| 221.9 grams | 24.4 % | |||||
| 342.8 grams | 14.1 % | |||||
| 408.5 grams | 8.5 % | |||||
| 444.0 grams | 5.5 % | |||||
| 463.3 grams | 3.8 % | |||||
| 473.8 grams | 2.93 % | |||||
| grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/24/2021 ✔