Summary for Test 2021-05-26-33-2
Test performed: AASHTO T315-16Project Information
Project Identifiers | Project ID: 215325 DEA: 101J1704 EFIS: 1018000179 |
---|---|
DIST-CO-RTE-PM | 10-AMA-88-32.3/38.0 |
Award Date | 12/30/2020 |
Closeout Date | 08/30/2021 |
Work Description | HMA, TRAFFIC STRIPING, COLD PLANE AC AND RUMBLE STRIP. |
Location Description | AMADOR COUNTY AT AND NEAR BARTON FROM 0.4 MILE WEST OF SILVER DRIVE TO 0.2 MILE WEST OF SHAKE RIDGE ROAD |
QA Service Level | 1 (Verified on 11/23/2020) |
Sample Information
Sample Taken Date | 05/26/2021 | Sample Unique Key | 33 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/04/2021 |
Sample type | Department Acceptance | A brief description of the sample | PG64-28M |
The quantity of what the sample constitutes | 1 of 1 can | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | J | Last name of sampler or witnessed by | Kort |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | George Reed - Clements Plant | Transportation Laboratory (TL) Number | c034815 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-28 M |
---|---|---|---|
Modified | Yes | Lot number | 1 |
Sublot number | Tank number | ||
Time of sample | HMA Supplier | George Reed - Clements | |
Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
Multigrade Type | Not set | Asphalt Binder Mix Number | Not set |
Test Details
DIME Sample ID: 2021-05-26-33
DIME Test ID: 2021-05-26-33-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-06-09
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 06/07/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.155 kPa
Phase Angle (δ) (for the 10 cycles): 65.0 degree
Complex Modulus (G*) (for the 10 measurements): 1.294 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.43 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications ORG
Test was verified on 6/9/2021 ✔