Summary for Test 2015-07-21-2-1
Test performed: CTM 521-November 2014Project Information
| Project Identifiers | Project ID: 209503 DEA: 11257154 EFIS: 1100020489 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-76,15-R46.2/R46.8, R12.1/R17.7 |
| Award Date | 08/04/2014 |
| Closeout Date | 08/16/2021 |
| Work Description | CONSTRUCT 4 LANE HIGHWAY. |
| Location Description | SAN DIEGO COUNTY NEAR BONSALL AND FALLBROOK ON ROUTE 15 FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF ROUTE 76/15 SEPARATION AND ON ROUTE 76 FROM 0.4 MILE WEST OF SOUTH MISSION ROAD TO 0.5 MILE EAST OF ROUTE 76/15 SEPARATION |
| QA Service Level | 1 (Verified on 08/25/2014) |
Sample Information
| Sample Taken Date | 07/21/2015 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/23/2015 |
| Sample type | Quality Control | A brief description of the sample | 6X12 |
| The quantity of what the sample constitutes | 2 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | DAVID | Last name of sampler or witnessed by | WEEKS |
| Title of sampler | CALTRANS METS QA INSPECTOR | Telephone number of sampler | 951-258-8382 |
| Laboratory sample identification | 913-01 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | JOB | Transportation Laboratory (TL) Number | L79 CSIP 001 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | CONSTRUCT 4 LANE HWY |
| Structure name | CASTING BED 9 GIRDER G1 8 | Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 1457-1 |
|---|---|---|---|
| The truck number from where the sample was collected | LOAD 7 | The batch plant ticket number from where the sample was collected | 56933 |
| Concrete batch plant | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| A detailed description of where the material sample was collected | TUCKER DISCHARGE | Where the material sample would have been placed if not sampled | Unknown |
| From Lot No. | Not set | Bag Lot No. | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2015-07-21-2
DIME Test ID: 2015-07-21-2-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 521-November 2014: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2015-07-28
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: Matthew Clayton
Date of test: 07/28/2015
Average diameter of cylinder 1: 6.01 in
Average diameter of cylinder 2: 6.01 in
Maximum load on cylinder 1: 267190 lb
Maximum load on cylinder 2: 270990 lb
Type of fracture pattern of cylinder 1: 4
Type of fracture pattern of cylinder 2: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Age of specimen: 7 days
Cross sectional area of cylinder 1: 28.37 in^2
Cross sectional area of cylinder 2: 28.37 in^2
Compressive strength of cylinder 1: 9418.0 psi
Compressive strength of cylinder 2: 9552.0 psi
Compressive strength (to nearest 10 psi): 9490 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/28/2015 ✔