Summary for Test 2021-04-28-23-3

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 213654
DEA: 060T20U4
EFIS: 0619000008
DIST-CO-RTE-PM06-KER-99-L0.0/11.2
Award Date01/07/2019
Closeout Date11/23/2021
Work DescriptionREPLACE JPCP LANES WITH CONTINUOUSLY REINFORCED CONCRETE PAVEMENT.
Location DescriptionKERN COUNTY NEAR WHEELER RIDGE FROM 0.8 MILE SOUTH OF ROUTE 5/99 SEPARATION TO 0.3 MILE NORTH OF OLD US 99 OVERCROSSING
QA Service Level1 (Verified on 12/27/2018)

Sample Information

Sample Taken Date04/28/2021 Sample Unique Key23
Date that the sample was received by the laboratory/organization performing the testing05/12/2021 Sample typeDepartment Acceptance
A brief description of the sampleAsphalt Binder The quantity of what the sample constitutes1 of 1 can
From where was the sample collectedSupplier First name of sampler or witnessed byAL
Last name of sampler or witnessed byGC Title of samplerQA
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameTank at Plant
Transportation Laboratory (TL) NumberC929394 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 70-10
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierSan Joaquin Refinery - Bakersfield CA MultigradeNo
Multigrade TypeNot set Asphalt Binder Mix NumberNot set
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2021-04-28-23
DIME Test ID: 2021-04-28-23-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-06-03

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Juan Gomez
Date of test: 05/26/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.230 kPa
Phase Angle (δ) (for the 10 cycles): 88.8 degree
Complex Modulus (G*) (for the 10 measurements): 2.303 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 2.30 kPa
General comments (publicly viewable) (Max 1000 characters): 2018 per Standard Specifications RTFO

Test was verified on 6/3/2021 ✔