Summary for Test 2021-03-25-9-3
Test performed: ASTM D638-Dec14Project Information
Project Identifiers | Project ID: 215254 DEA: 031G5104 EFIS: 0318000313 |
---|---|
DIST-CO-RTE-PM | 03-BUT,COL,GLE,SUT,YOL-5,32,70,80,162-VAR |
Award Date | 12/16/2020 |
Closeout Date | 09/27/2021 |
Work Description | REMOVE & PLACE POLYESTER CONC OVERLAY, PLACE JOINT SEAL & HMA. |
Location Description | BUTTE, COLUSA, GLENN, SUTTER, AND YOLO COUNTIES AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 11/11/2020) |
Sample Information
Sample Taken Date | 03/25/2021 | Sample Unique Key | 9 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/25/2021 |
Sample type | Quality Control | A brief description of the sample | 1 gallon can |
The quantity of what the sample constitutes | 8 tankers | From where was the sample collected | Source |
First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Tikusis |
Title of sampler | Technical Director | Telephone number of sampler | 707-330-9227 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Kwik Bond Polymers and Polynt | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Polyester | Mfg. Lot Number(s) | 1322429 |
---|---|---|---|
Batch number | 1322429 | Mix number | 1322429 |
Test Details
DIME Sample ID: 2021-03-25-9
DIME Test ID: 2021-03-25-9-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2021-05-19
Test Results
Number of specimens tested: 5
Input Type: Measured
Tester's full name: Phillip Montes
Date of test: 04/06/2021
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.491 in
Sample 1 Thickness: 0.227 in
Sample 1 Area: 0.1115 in^2
Sample 1 Ultimate Strength Actual: 338 lbs
Sample 1 percent elongation: 50.6 %
Sample 1 Time: 3 MM:SS
Sample 2 Width: 0.49 in
Sample 2 Thickness: 0.228 in
Sample 2 Area: 0.1117 in^2
Sample 2 Ultimate Strength Actual: 354.4 lbs
Sample 2 percent elongation: 41.8 %
Sample 2 Time: 3 MM:SS
Sample 3 Width: 0.491 in
Sample 3 Thickness: 0.232 in
Sample 3 Area: 0.1139 in^2
Sample 3 Ultimate Strength Actual: 354.1 lbs
Sample 3 percent elongation: 54.3 %
Sample 3 Time: 3 MM:SS
Sample 4 Width: 0.49 in
Sample 4 Thickness: 0.235 in
Sample 4 Area: 0.1152 in^2
Sample 4 Ultimate Strength Actual: 364.2 lbs
Sample 4 percent elongation: 54.7 %
Sample 4 Time: 3 MM:SS
Sample 5 Width: 0.491 in
Sample 5 Thickness: 0.234 in
Sample 5 Area: 0.1149 in^2
Sample 5 Ultimate Strength Actual: 377 lbs
Sample 5 percent elongation: 68.4 %
Sample 5 Time: 3 MM:SS
Sample 1 Ultimate strength: 3031.4 psi
Sample 2 Ultimate strength : 3172.8 psi
Sample 3 Ultimate strength: 3108.9 psi
Sample 4 Ultimate strength: 3161.5 psi
Sample 5 Ultimate strength: 3281.1 psi
Ultimate Strength Average: 3151 psi
Percent Elongation Average: 54 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/19/2021 ✔