DIME - Test Summary

Summary for Test 2021-04-23-10-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 215188 DEA: 080F5434 EFIS: 0817000239 Permit Numbers: 0823NMC0369
DIST-CO-RTE-PM	08-RIV-I-15,SR-91-6.1-7.6
Award Date	03/11/2020
Closeout Date	06/05/2024
Work Description	I-15 ELC: 15/91 Express Lanes Connector Project (ELC)
Location Description	Junction of I-15 and SR-91 in Corona, CA
QA Service Level	1 (Verified on 09/16/2020)

Sample Taken Date	04/23/2021	Sample Unique Key	10
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/29/2021
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA-A-SP R15 No LAS
The quantity of what the sample constitutes	4 Bags Of Combined Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	AAA	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0244A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	AAA-Corona	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R15	The fabricator/manufacturer designation for the sample
The plant number	105973	A detailed description of where the material sample was collected	Belt Cut at All American Corona Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-04-23-10

DIME Test ID: 2021-04-23-10-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-05-04

Input Type: Measured

Tester's full name: Danilo Ferrer

Date of test: 05/03/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 969.9 grams

Mass of the pycnometer with water (B): 653.2 grams

Mass of the oven dried sample (before pycnometer) (A): 493.4 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 493.4 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.692

Bulk specific gravity (SSD Basis): 2.728

Apparent specific gravity: 2.792

Absorption: 1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/4/2021 ✔