DIME - Test Summary

Summary for Test 2021-04-14-14-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 210227 DEA: 07286204 EFIS: 0713000217
DIST-CO-RTE-PM	07-LA-138-56.20/55.20
Award Date	03/14/2019
Closeout Date	01/13/2023
Work Description	WIDEN ROUTE 138 TO 4 LANES WITH A MEDIAN TURN LANE AND STANDARD WIDTH SHOULDERS.; DRAINAGE IMPROVEMENTS.
Location Description	IN LOS ANGELES COUNTY IN PALMDALE FROM 87TH STREET EAST TO 96TH STREET EAST
QA Service Level	1 (Verified on 06/27/2019)

Sample Taken Date	04/14/2021	Sample Unique Key	14
Date that the sample was received by the laboratory/organization performing the testing	04/16/2021	Sample type	Verification
A brief description of the sample	JMF 3/4" WMA-A-SP R25 0.3% Evotherm	The quantity of what the sample constitutes	4 Bags of Coldfeed, 2 Bags of RAP
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	William
Last name of sampler or witnessed by	Lucas	Title of sampler
Telephone number of sampler		Laboratory sample identification	0227A-21
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Granite Construction Llano
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0046::BIG ROCK CREEK- GRANITE
The fabricator's/manufacturer's product name for the sample	3/4 WMA-A-SP R25	The fabricator/manufacturer designation for the sample
The plant number	1639	A detailed description of where the material sample was collected	Belt Cut at Granite Llano
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-04-14-14

DIME Test ID: 2021-04-14-14-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-04-30

Input Type: Measured

Tester's full name: Michael Magana

Date of test: 04/28/2021

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	969.4 grams
Mass of the pycnometer with water (B)	653.2 grams
Mass of the oven dried sample (before pycnometer) (A)	496.7 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	496.7 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.702
Bulk specific gravity (SSD Basis)	2.720
Apparent specific gravity	2.752
Absorption	0.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/30/2021 ✔