Summary for Test 2021-04-14-15-2
Test performed: AASHTO T313-19Project Information
| Project Identifiers | Project ID: 213583 DEA: 060H2004 EFIS: 0612000157 |
|---|---|
| DIST-CO-RTE-PM | 06-TUL-201,216-12.5,21.2,18.7 |
| Award Date | 11/29/2018 |
| Closeout Date | 11/29/2021 |
| Work Description | BRIDGE WIDENING, UPGRADE LANES AND OUTSIDE SHOULDERS. |
| Location Description | TULARE COUNTY NEAR CUTLER ON ROUTE 201 AT SAND CREEK BRIDGE AND AT FRIANT KERN CANAL BRIDGE AND NEAR WOODLAKE ON ROUTE 216 AT KAWEAH RIVER BRIDGE |
| QA Service Level | 1 (Verified on 09/25/2018) |
Sample Information
| Sample Taken Date | 04/14/2021 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/20/2021 |
| Sample type | Department Acceptance | A brief description of the sample | Asphalt Binder |
| The quantity of what the sample constitutes | 1 of 1 Can | From where was the sample collected | Other |
| First name of sampler or witnessed by | Brandon | Last name of sampler or witnessed by | Not Provided |
| Title of sampler | Vulcan Tech | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan Fresno | Transportation Laboratory (TL) Number | 816157 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 70-10 |
|---|---|---|---|
| Modified | No | Lot number | 3 |
| Sublot number | 2 | Tank number | |
| Time of sample | HMA Supplier | Vulcan Materials | |
| Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
| Multigrade Type | Not set | Asphalt Binder Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-04-14-15
DIME Test ID: 2021-04-14-15-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2021-04-29
Test Results
Input Type: Measured
Tester's full name: Ruben Macias
Date of test: 04/28/2021
Minimum test bath temperature at 240 s: 0.0 C
Maximum test bath temperature at 240 s: 0.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 972.0 mN
Beam deflection 60.0 s: 0.322 µm
Measured Stiffness Modulus 60.0 s: 243.000 mPa
Estimated Stiffness Modulus 60.0 s: 243.000 mPa
Difference between stiffness moduli 60.0 s: 0 %
Estimated m-value 60.0 s: 0.372
General comments (publicly viewable) (Max 1000 characters): PER 2018 STANDARD SPECS
Test was verified on 4/29/2021 ✔