DIME - Test Summary

Summary for Test 2021-03-29-13-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214850 DEA: 081K1404 EFIS: 0818000200
DIST-CO-RTE-PM	08-RIV-10-R139.0/R155.0
Award Date	05/08/2020
Closeout Date	11/09/2021
Work Description	STRUCTURE CONCRETE, FURNISH AND PLACE POLYESTER CONCRETE.
Location Description	RIVERSIDE COUNTY IN AND NEAR BLYTHE FROM ISORA DITCH TO ROUTE 10/95 SEPARATION
QA Service Level	1 (Verified on 08/18/2020)

Sample Taken Date	03/29/2021	Sample Unique Key	13
Date that the sample was received by the laboratory/organization performing the testing	04/06/2021	Sample type	Verification
A brief description of the sample	JMF 1/2" HMA-A-SP R15 0.5% LAS	The quantity of what the sample constitutes	8 Bags of Aggregate, 2 Bags of RAP
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Chris
Last name of sampler or witnessed by	Lawless	Title of sampler
Telephone number of sampler		Laboratory sample identification	0194A-21
Linked DIME Sample ID		The fabricator/manufacturer/facility name	California Commercial Asphalt - Coachella
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0084
The fabricator's/manufacturer's product name for the sample	1/2 HMA-A-SP R15	The fabricator/manufacturer designation for the sample
The plant number	41217333	A detailed description of where the material sample was collected	Belt Cut at California Commercial Asphalt Coachella Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-03-29-13

DIME Test ID: 2021-03-29-13-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-04-28

Input Type: Measured

Tester's full name: Sebastian Ferrer

Date of test: 04/14/2021

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	966.0 grams
Mass of the pycnometer with water (B)	653.2 grams
Mass of the oven dried sample (before pycnometer) (A)	494.8 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	494.8 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.643
Bulk specific gravity (SSD Basis)	2.671
Apparent specific gravity	2.719
Absorption	1.1 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/28/2021 ✔