Summary for Test 2021-03-12-13-3
Test performed: AASHTO T209-12Project Information
| Project Identifiers | Project ID: 214900 DEA: 034F8104 EFIS: 0314000291 |
|---|---|
| DIST-CO-RTE-PM | 03-GLE-32-L0.0/R0.3,0.1/0.9 |
| Award Date | 06/15/2020 |
| Closeout Date | 06/29/2021 |
| Work Description | CONSTRUCT SIDEWALKS, CURB RAMPS, & DRIVEWAYS. |
| Location Description | GLENN COUNTY IN ORLAND AT VARIOUS LOCATIONS FROM ROUTE 5 SOUTHBOUND OFF RAMP TO ROUTE 32 TO NINTH STREET/TEHAMA STREET AND FROM FOURTH STREET TO WOODWARD AVENUE |
| QA Service Level | 1 (Verified on 04/15/2020) |
Sample Information
| Sample Taken Date | 03/12/2021 | Sample Unique Key | 13 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/12/2021 |
| Sample type | Verification | A brief description of the sample | 3/4" HMA - A, with 15% RAP |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Brad McKeehan (WITNESS) | Last name of sampler or witnessed by | KRC Personnel (SAMPLER) |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | JMF21-003 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Knife River Construction - Orland Drum Plant | Transportation Laboratory (TL) Number | C778174 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-03-12-13
DIME Test ID: 2021-03-12-13-3
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2021-04-01
Test Results
Number of tests: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Terrance White
Date of test: 03/15/2021
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7406.5 grams
Mass of oven-dry sample in air for Sample 1: 2122.6 grams
Mass of container filled with the sample and water for Sample 1: 8695.8 grams
Temperature of Water: 76 °F
Specific Gravity for Sample 1: 2.547
Theoretical maximum density at 25°C (77°F): no data
General comments (publicly viewable) (Max 1000 characters): JMF21-003.
Test was verified on 4/1/2021 ✔