Summary for Test 2015-06-01-11-1
Test performed: CTM 202-Oct 2014Project Information
| Project Identifiers | Project ID: 7203 DEA: 05330774 EFIS: 0500020049 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-46-40.7/46.3 |
| Award Date | 05/18/2012 |
| Closeout Date | 12/16/2016 |
| Work Description | CONVERT TWO-LANE HIGHWAY TO FOUR-LANE EXPRESSWAY. |
| Location Description | SAN LUIS OBISPO COUNTY NEAR PASO ROBLES FROM 0.1 MILE EAST OF ALMOND DRIVE TO 0.8 MILE EAST OF MCMILLAN CANYON ROAD |
| QA Service Level | 1 (Verified on 10/01/2012) |
Sample Information
| Sample Taken Date | 06/01/2015 | Sample Unique Key | 11 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/17/2015 | Sample type | Verification |
| A brief description of the sample | 3/4 Type A HMA | The quantity of what the sample constitutes | 1 bag |
| From where was the sample collected | Source | First name of sampler or witnessed by | Tim |
| Last name of sampler or witnessed by | Lang | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | 15SSPH-0286 |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Hanson Aggregate |
| Transportation Laboratory (TL) Number | C755705B | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | NA |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2015-06-01-11
DIME Test ID: 2015-06-01-11-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-Oct 2014: Method of Test for Determining Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2015-06-26
Test Results
What size aggregate is being tested?: Combined Gradation
Input Type: Calculated
Tester's full name: Thomas Stinnett
Date of test: 06/17/2015
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 99 %
Cumulative percent passing the 1/2 in. sieve: 78 %
Cumulative percent passing the 3/8 in. sieve: 57 %
Cumulative percent passing the #4 sieve: 36 %
Cumulative percent passing the #8 sieve: 19 %
Cumulative percent passing the #16 sieve: 13 %
Cumulative percent passing the #30 sieve: 8 %
Cumulative percent passing the #50 sieve: 5 %
Cumulative percent passing the #100 sieve: 3 %
Cumulative percent passing the #200 sieve: 2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/26/2015 ✔