Summary for Test 2021-02-18-3-2
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 214655 DEA: 030H3304 EFIS: 0315000145 |
|---|---|
| DIST-CO-RTE-PM | 03-BUT,TEH-99-13.3/19.5,45.9,0.0/0.2 |
| Award Date | 04/21/2020 |
| Closeout Date | 09/23/2021 |
| Work Description | REPLACE BRIDGE RAILS AND WIDEN BRIDGE. |
| Location Description | BUTTE COUNTY NEAR CHICO FROM 0.1 MILE NORTH OF RICHVALE EAST ROAD TO 1.6 MILES NORTH OF BROYLES ROAD |
| QA Service Level | 1 (Verified on 03/24/2020) |
Sample Information
| Sample Taken Date | 02/18/2021 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 02/18/2021 | Sample type | Quality Assurance |
| A brief description of the sample | #10 Barsplice Grip Twist Couplers Lot 1A and Lot 1B | The quantity of what the sample constitutes | 100 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Sherri |
| Last name of sampler or witnessed by | Brannon | Title of sampler | QA |
| Telephone number of sampler | 916-826-6371 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Camblin Steel Service | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | CMC |
| Coupler Manufacturer | Bar Splice | Intermediate Assembler or Fabricator | Fabricator |
| Rebar Size | #10 | Coupler Model | Grip Twist Couplers |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
| Coupler Component Heat/Lot Number(s) | A201362/6O1 Male A195234/5Y1 Female | Rebar Heat Number(s) | 9002040 |
| Rebar Size 2 | Coupler Unique ID | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-02-18-3
DIME Test ID: 2021-02-18-3-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Cyclical/Fatique Tensile with Slip)
Test Release Date: 2021-02-24
Test Results
Number of Samples Tested: 1
Input Type: Measured
Tester's full name: bewing
Date of test: 02/24/2021
UTM: 2000kip
Temperature: 72.00 f
Halo ID: Small
| Num | Sample | Number of Cycles | Size | Mfg. Lot Number(s) | Slip (inch) | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | No. 10/32mm | 1A | -0.0034 | 1.27 | 123170 | 96984 | Ok Necking | bewing |
General comments (publicly viewable) (Max 1000 characters): Ok Necking
Test Graph
Source: Bluehill Data Point File
WARNING: position or load not found in data points imported from Instron machine.
Test was verified on 2/24/2021 ✔