DIME - Test Summary

Summary for Test 2020-11-24-27-1

Test performed: AASHTO T27-14

Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.

Project Identifiers	Project ID: 66667 DEA: JMFPP EFIS: 0019000043
DIST-CO-RTE-PM	59---
Award Date	Not set
Closeout Date	Not set
Work Description	Special project for submitting Sample information for JMF Prequalification Program.
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Taken Date	11/24/2020	Sample Unique Key	27
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	11/30/2020
Sample type	Verification	A brief description of the sample	3/4" Aggregate for JMF Verification
The quantity of what the sample constitutes	2 bags RAP 1 bag mineral filler 3 bags for each bin 1-4	From where was the sample collected	Source
First name of sampler or witnessed by	Donald	Last name of sampler or witnessed by	Zuniga
Title of sampler	TET	Telephone number of sampler	4084215620
Laboratory sample identification	20-JMFPP-0228	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Syar Industries	Transportation Laboratory (TL) Number	911412
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-48-0002::LAKE HERMAN QUARRY
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample	Batch plant bins
The plant number		A detailed description of where the material sample was collected	Cold feeds
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-11-24-27

DIME Test ID: 2020-11-24-27-1

Testing Lab: CT D01 - District 1 Materials Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2021-01-07

What type of gradation is being tested?: HMA Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: No

Input Type: Calculated

Tester's full name: Leif Ayres

Date of test: 01/06/2021

Cumulative percent passing the 1 1/2 in. sieve: 83 %

Cumulative percent passing the 1 in. sieve: 83 %

Cumulative percent passing the 3/4 in. sieve: 81.5 %

Cumulative percent passing the 1/2 in. sieve: 65.4 %

Cumulative percent passing the 3/8 in. sieve: 56.9 %

Cumulative percent passing the #4 sieve: 37.9 %

Cumulative percent passing the #8 sieve: 24.8 %

Cumulative percent passing the #16 sieve: 15.1 %

Cumulative percent passing the #30 sieve: 10.4 %

Cumulative percent passing the #50 sieve: 6.7 %

Cumulative percent passing the #100 sieve: 4.3 %

Cumulative percent passing the #200 sieve: 3 %

General comments (publicly viewable) (Max 1000 characters): Combined Gradation from 4 bins. Bin 1 @ 30%, Bin 2 @ 18%, Bin 3 @ 18% and Bin 4 @ 17%.

Test was verified on 1/7/2021 ✔

Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.