Summary for Test 2021-05-19-3-3
Test performed: CTM 670-December 2013Project Information
Project Identifiers | Project ID: 214795 DEA: 030H3424 EFIS: 0317000153 |
---|---|
DIST-CO-RTE-PM | 03-SAC-99-22.6 |
Award Date | 11/13/2020 |
Closeout Date | 03/03/2022 |
Work Description | REPLACE BRIDGE DECK WITH PRESTRESSED CONCRETE BOX GIRDER. |
Location Description | SACRAMENTO COUNTY IN SACRAMENTO AT 21ST AVENUE UNDERCROSSING |
QA Service Level | 1 (Verified on 03/12/2020) |
Sample Information
Sample Taken Date | 05/19/2021 | Sample Unique Key | 3 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/20/2021 |
Sample type | Quality Assurance | A brief description of the sample | #6 Lenton form savers |
The quantity of what the sample constitutes | 3 lots | From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Jane | Last name of sampler or witnessed by | Lillard |
Title of sampler | CALTRANS METS QA INSPECTOR | Telephone number of sampler | 916-291-8042 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | ConFab | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | S52-019-21 | Structure unique identifier | 24-0154 |
Structure name | 21st Ave Undercrossing |
Material Information
Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
---|---|---|---|
Service or Ultimate | Service | Material Standard Code | ASTM A706 |
Material Grade | 60 | Rebar Manufacturer | CMC |
Coupler Manufacturer | Erico | Intermediate Assembler or Fabricator | PTS Masonry at Confab |
Rebar Size | #6 | Coupler Model | Formsaver |
Coating Standards | Uncoated | Shape of Rebar | Straight |
Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
Coupler Component Heat/Lot Number(s) | Erico heat 201852 lot 9783 and 9809 | Rebar Heat Number(s) | 4105278 4101843 |
Rebar Size 2 | 6 | Coupler Unique ID | Not set |
Test Details
DIME Sample ID: 2021-05-19-3
DIME Test ID: 2021-05-19-3-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Cyclical/Fatique Tensile with Slip)
Test Release Date: 2021-05-20
Test Results
Number of Samples Tested: 1
Input Type: Measured
Tester's full name: bewing
Date of test: 05/20/2021
UTM: 400kip
Temperature: 72.00 f
Halo ID:
Num | Sample | Number of Cycles | Size | Mfg. Lot Number(s) | Slip (inch) | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
---|---|---|---|---|---|---|---|---|---|---|
1 | 3 | No. 6/19mm | 1 | 0 | 0.44 | 41218 | 93677 | Service Splice | bewing |
General comments (publicly viewable) (Max 1000 characters): Service Splice
Test Graph
Source: Bluehill Data Point File
WARNING: position or load not found in data points imported from Instron machine.
Test was verified on 5/20/2021 ✔