DIME - Test Card

Test Card

Tester's full name *

____________

Date of test *

____ / ____ / ____ (Month / Day / Year)

Specimen Preparation Method

Molded Extruded (Circle One)

Molded / Extruded per ASTM D3111 Section 7

Specimen Width

____________ mm

10 mm recommended

Specimen Length

____________ mm

75 mm recommended

Specimen Thickness

____________ mm

1.25 mm ±0.01 mm

Conditioning Time

____________ h

24 h (or 4 h rapid) per D3111 Section 8

Conditioning Temperature

____________ C

23 ±2 °C

Conditioning RH

____________ %

50 ±5 %

Mandrel Diameter Tested

____________ mm

Smallest diameter tried

Pass/Fail Result *

Pass Fail (Circle One)

Per-section 9 failure definition

Flexibility Rating

____________ mm

Smallest mandrel diameter with 4/5 passes

General comments (publicly viewable) (Max 1000 characters)

__________________________________________________________
__________________________________________________________

Project test result compliance comments (Max 1000 characters)

__________________________________________________________
__________________________________________________________

Test result compliancecomplies does not comply not applicable (Circle One)