DIME - Test Card

DIME » Supported Test Methods » Test Card

Test Card

ASTM WK86870-0: New Test Method for Determination of Rutting Resistance Using High Temperature Indirect Tensile (HT-IDT) Strength of Asphalt Mixtures

Tester's full name *

____________

Date of test *

____ / ____ / ____ (Month / Day / Year)

Binder PG *

____________

Binder Content TWM *

____________ %

Aggregate gradation NMAS *

____________ mm

Specimen air void *

____________ %

Specimen thickness (t) *

____________ mm

Specimen diameter (D) *

____________ mm

Reheat protocol used *

None CT 320 Reheat 1 hour at compaction temperature CT 320 Reheat 1 hour at 135C CT 320 Reheat 2 hours at compaction temperature CT 320 Reheat 2 hours at 135C CT 320 Reheat 3 hours at compaction temperature CT 320 Reheat 3 hours at 135C (Circle One)

Condition Method *

oven chamber water bath (Circle One)

Condition temperature *

____________ C

Record the Condition temperature to the nearest degree

Condition time *

____________ min

Testing temperature *

____________ C

Record the Testing temperature to the nearest 0.1 degrees

Loading rate *

____________ mm/min

Maximum load (Pmax) *

____________ N

Indirect tensile strength (St) *

(Calculated by DIME) kPa

General comments (publicly viewable) (Max 1000 characters)

__________________________________________________________
__________________________________________________________

Project test result compliance comments (Max 1000 characters)

__________________________________________________________
__________________________________________________________

Test result compliancecomplies does not comply not applicable (Circle One)