DIME - Test Card

DIME » Supported Test Methods » Test Card

Test Card

CTM 382-August 2026: Method Of Test For Determination Of Binder Content Of Hot Mix Asphalt By The Ignition Method (Ignition Method)

Ignition Method

How many specimens were used in this test? *

Does the mixture contain RAP? *

Were correction factors for this mix/oven already determined? *

Tester's full name *

____________

Date of test *

____ / ____ / ____ (Month / Day / Year)

Design Asphalt Binder Content per JMF

____________ %

Percent of RAP by Mixture Mass

____________ %

Corrected RAP Binder Content

____________ %

Measured Asphalt Binder Content of Correction Specimen 1

____________ %

Measured Asphalt Binder Content of Correction Specimen 2

____________ %

Mass of Specimen Basket Assembly *

____________ g

Mass of Specimen and Specimen Basket Assembly prior to ignition *

____________ g

Mass Loss *

____________ g

Moisture Content *

____________ %

Temperature Compensation Factor *

____________ %

Test Temperature *

____________ C

(Combined) Blank - % Passing for the 2 in. sieve

____________ %

(Combined) Blank - % Passing for the 1 1/2 in. sieve

____________ %

(Combined) Blank - % Passing for the 1 in. sieve

____________ %

(Combined) Blank - % Passing for the 3/4 in. sieve

____________ %

(Combined) Blank - % Passing for the 1/2 in. sieve

____________ %

(Combined) Blank - % Passing for the 3/8 in. sieve

____________ %

(Combined) Blank - % Passing for the #4 sieve

____________ %

(Combined) Blank - % Passing for the #8 sieve

____________ %

(Combined) Blank - % Passing for the #16 sieve

____________ %

(Combined) Blank - % Passing for the #30 sieve

____________ %

(Combined) Blank - % Passing for the #50 sieve

____________ %

(Combined) Blank - % Passing for the #100 sieve

____________ %

(Combined) Blank - % Passing for the #200 sieve

____________ %

Correction Specimen 1 - % Passing for the 2 in. sieve

____________ %

Correction Specimen 1 - % Passing for the 1 1/2 in. sieve

____________ %

Correction Specimen 1 - % Passing for the 1 in. sieve

____________ %

Correction Specimen 1 - % Passing for the 3/4 in. sieve

____________ %

Correction Specimen 1 - % Passing for the 1/2 in. sieve

____________ %

Correction Specimen 1 - % Passing for the 3/8 in. sieve

____________ %

Correction Specimen 1 - % Passing for the #4 sieve

____________ %

Correction Specimen 1 - % Passing for the #8 sieve

____________ %

Correction Specimen 1 - % Passing for the #16 sieve

____________ %

Correction Specimen 1 - % Passing for the #30 sieve

____________ %

Correction Specimen 1 - % Passing for the #50 sieve

____________ %

Correction Specimen 1 - % Passing for the #100 sieve

____________ %

Correction Specimen 1 - % Passing for the #200 sieve

____________ %

Correction Specimen 2 - % Passing for the 2 in. sieve

____________ %

Correction Specimen 2 - % Passing for the 1 1/2 in. sieve

____________ %

Correction Specimen 2 - % Passing for the 1 in. sieve

____________ %

Correction Specimen 2 - % Passing for the 3/4 in. sieve

____________ %

Correction Specimen 2 - % Passing for the 1/2 in. sieve

____________ %

Correction Specimen 2 - % Passing for the 3/8 in. sieve

____________ %

Correction Specimen 2 - % Passing for the #4 sieve

____________ %

Correction Specimen 2 - % Passing for the #8 sieve

____________ %

Correction Specimen 2 - % Passing for the #16 sieve

____________ %

Correction Specimen 2 - % Passing for the #30 sieve

____________ %

Correction Specimen 2 - % Passing for the #50 sieve

____________ %

Correction Specimen 2 - % Passing for the #100 sieve

____________ %

Correction Specimen 2 - % Passing for the #200 sieve

____________ %

Mass of aggregate remaining after ignition *

(Calculated by DIME) g

Corrected Asphalt Binder Content *

(Calculated by DIME) %

Mass of HMA Sample prior to ignition *

__________ g

Average Binder Correction Factor *

__________ %

General comments (publicly viewable) (Max 1000 characters)

__________________________________________________________
__________________________________________________________

Project test result compliance comments (Max 1000 characters)

__________________________________________________________
__________________________________________________________

Test result compliancecomplies does not comply not applicable (Circle One)