Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Please enter search terms to find matching test methods implemented in DIME. Terms such as "ASTM C39", "C39", "compressive strength" are acceptable. You can use the advanced search function if you wish to perform a refined search.
Displaying 301-325 of 387 results.
| Test Org | Test Prefix | Test Number | Version | Test Name | Part | Date Added | Material Type | Sample Card |
|---|---|---|---|---|---|---|---|---|
| ASTM | D | 7553 | 15 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide | Solubility | 4/1/2020 | Asphalt Binder | View |
| ASTM | D | 471 | 15a | Standard Test Method for Rubber Property - Effect of Liquids | 11/20/2014 | SMTL TM2 - Type B Elastomeric Joint Seal | View | |
| ASTM | D | 2007 | 11 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method | Clay Gel Absorption | 6/14/2017 | Asphalt Modifier | View |
| ASTM | A | 416 | 15 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | 11/25/2014 | SMTL TM4 - Prestressing Strand | View | |
| ASME | B | 1.2 | 83r17 | (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Ring Gage | 12/10/2021 | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r01 | (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Ring Gage | 6/16/2015 | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r17 | (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Pitch Diameter | 12/10/2021 | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r17 | (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Plug Gage | 12/10/2021 | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r01 | (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Pitch Diameter | 8/16/2016 | SMTL TM3 - Fastener Assembly | View |
| ASME | B | 1.2 | 83r01 | (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Plug Gage | 9/6/2016 | SMTL TM3 - Fastener Assembly | View |
| AASHTO | T | 350 | 19 | Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Multiple Stress Creep Recovery | 6/17/2020 | Asphalt Binder | View |
| AASHTO | T | 315 | 12 | Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Dynamic Shear | 6/14/2016 | Asphalt Binder | View |
| AASHTO | T | 148 | 7 | Measuring Length of Drilled Concrete Cores | 1/1/2014 | Concrete | View | |
| AASHTO | T | 245 | 15r19 | Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus | 5/13/2021 | Hot Mix Asphalt Partial Depth Recycling | View | |
| AASHTO | T | 315 | 20 | Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Dynamic Shear | 6/10/2021 | Asphalt Binder | View |
| AASHTO | T | 209 | 12 | Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures | Maximum Specific Gravity | 4/29/2015 | Aggregate Reclaimed Asphalt Pavement Hot Mix Asphalt Partial Depth Recycling | View |
| AASHTO | T | 265 | 15r19 | Standard Method of Test for Laboratory Determination of Moisture Content of Soils | 8/9/2021 | Partial Depth Recycling | View | |
| AASHTO | T | 27 | 14 | Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Sieve Analysis | 4/29/2015 | Aggregate Antistrip Additive Partial Depth Recycling | View |
| AASHTO | T | 331 | 13r17 | Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method | 8/10/2021 | Partial Depth Recycling | View | |
| AASHTO | T | 96 | 02r10 | Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine | Los Angeles Rattler | 1/1/2013 | Aggregate | View |
| AASHTO | T | 304 | 11 | Standard Method of Test for Uncompacted Void Content of Fine Aggregate | Fine of Crushed Particles | 1/1/2013 | Aggregate | View |
| AASHTO | T | 336 | 15 | Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete | 11/4/2015 | Concrete | View | |
| AASHTO | T | 84 | 14 | Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate | Fine Specific Gravity | 1/1/2013 | Aggregate | View |
| AASHTO | T | 11 | 5 | Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing | 1/1/2013 | Aggregate Partial Depth Recycling | View | |
| AASHTO | T | 85 | 13 | Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Coarse Specific Gravity | 1/1/2013 | Aggregate | View |