Search Test Methods

Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.

Please enter search terms to find matching test methods implemented in DIME. Terms such as "ASTM C39", "C39", "compressive strength" are acceptable. You can use the advanced search function if you wish to perform a refined search.

Displaying 126-150 of 379 results.
Test OrgTest PrefixTest NumberVersionTest NamePartDate AddedMaterial TypeSample Card
ASTMC15717Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete 5/29/2024Cementitious
View
CTM53420Method of Test for Water Retention Efficiency of Liquid Membrane-Forming Concrete Curing Compounds 5/29/2024Curing Compound
View
ASTMC10923Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 6/10/2024Cementitious
View
ASTMC45113Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method) 5/1/2017Cementitious
View
CTM43521Method of Test for Two-component, Type A and AL Joint Seals 7/9/2024Joint Seal (Type A & AL)
View
CTM5531Method for Testing Thermal Stability of Mortar Made with Hydraulic Cement 5/23/2017Cementitious
View
CTM556January 2018Method of Test for Slump of Fresh Portland Cement Concrete 1/22/2018Concrete
View
ASTMD758515Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments 3/1/2018Paint
View
ASTMD248617Standard Test Methods for Scrub Resistance of Wall Paints 3/30/2018Paint
View
CTM551August 2012Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures 6/28/2018Polyester
View
AASHTOT24017Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) 7/17/2018Asphalt Binder
Asphaltic Emulsion
View
AASHTOT31617Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer 7/23/2018Asphalt Binder
View
ASTME7015Standard Test Method for pH of Aqueous Solutions With the Glass Electrode 8/6/2018Paint
View
ASTMC125217Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) 8/17/2018Aggregate
View
CTM504June 2010Method of Test for Determining Air Content of Freshly Mixed Concrete by the Pressure Method 1/1/2014Concrete
View
ASTMD299514Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors 9/27/2018Asphalt Binder
View
CTM521June 2012Method of Test for Compressive Strength of Molded Concrete Cylinders 1/1/2014Concrete
View
ASTME41517Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry 10/11/2018SMTL TM6 - Steel Check Sample Plate
View
CTM368November 2010Method of Test for Optimum Bitumen Content (OBC) for Open Graded Asphalt Concrete 10/11/2018Hot Mix Asphalt
View
ASTMC10916aStandard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 11/20/2018Cementitious
View
CTM330September 2017Method of Test for Residue by Evaporation of Emulsified Asphalt 12/13/2018Asphaltic Emulsion
View
CTM331September 2017Method of Test for Residue by Evaporation of Latex Modified Asphalt Emulsion 12/13/2018Asphalt Binder
Asphaltic Emulsion
View
CTM543July 2001Method of Test for Determining Air Content of Freshly Mixed Concrete by the Volumetric Method 1/1/2014Concrete
View
AASHTOT4915Standard Method of Test for Penetration of Bituminous Materials 1/7/2019Asphaltic Emulsion
View
CTM302April 2014Method of Test for Stripping 3/4/2019Hot Mix Asphalt
View