Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Please enter search terms to find matching test methods implemented in DIME. Terms such as "ASTM C39", "C39", "compressive strength" are acceptable. You can use the advanced search function if you wish to perform a refined search.
Test Org | Test Prefix | Test Number | Version | Test Name | Part | Date Added | Material Type | Sample Card |
---|---|---|---|---|---|---|---|---|
AASHTO | T | 201 | 15 | Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) | Extender Oil | 12/13/2016 | Asphalt Binder | View |
ASTM | C | 187 | 16 | Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste | Water Normal Consistency | 1/27/2017 | Cementitious | View |
AASHTO | T | 269 | 14 | Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures | Air Void | 4/10/2017 | Hot Mix Asphalt Partial Depth Recycling | View |
AASHTO | T | 275 | 07r12 | Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens | Bulk Specific Gravity | 4/10/2017 | Hot Mix Asphalt | View |
ASTM | C | 451 | 13 | Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method) | 5/1/2017 | Cementitious | View | |
ASTM | C | 266 | 15 | Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles | 5/4/2017 | Cementitious | View | |
AASHTO | T | 329 | 13 | Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method | Moisture Content | 5/4/2017 | Hot Mix Asphalt Partial Depth Recycling | View |
AASHTO | T | 312 | 14 | Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor | Method of Compaction | 5/5/2017 | Hot Mix Asphalt Partial Depth Recycling | View |
AASHTO | T | 324 | 14 | Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures | Hamburg Wheel Track | 5/5/2017 | Hot Mix Asphalt | View |
CTM | 553 | 1 | Method for Testing Thermal Stability of Mortar Made with Hydraulic Cement | 5/23/2017 | Cementitious | View | ||
ASTM | D | 217 | 16 | Standard Test Methods for Cone Penetration of Lubricating Grease | Cone Penetration | 5/25/2017 | Asphalt Rubber Binder | View |
AASHTO | T | 283 | 14 | Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage | Moisture Content | 6/2/2017 | Hot Mix Asphalt Partial Depth Recycling | View |
AASHTO | T | 228 | 09r13 | Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials | Specific Gravity | 6/14/2017 | Asphalt Binder | View |
ASTM | D | 36 | 14ε1 | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) | Softening Point | 6/14/2017 | Asphalt Rubber Binder Thermoplastic Asphalt Plug Joint Seal | View |
ASTM | D | 92 | 12b | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester | Flash Point | 6/14/2017 | Asphalt Modifier | View |
ASTM | D | 7741 | 11ε1 | Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer | Viscosity | 6/14/2017 | Asphalt Rubber Binder | View |
ASTM | D | 2074 | 07r13 | Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method | Amine | 6/14/2017 | Antistrip Additive | View |
ASTM | D | 445 | 14 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) | Kinematic Viscosity | 6/14/2017 | Asphalt Modifier Asphalt Binder | View |
ASTM | D | 2007 | 11 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method | Clay Gel Absorption | 6/14/2017 | Asphalt Modifier | View |
AASHTO | T | 308 | 10 | Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) | Asphalt Binder Content | 6/29/2017 | Reclaimed Asphalt Pavement Hot Mix Asphalt Partial Depth Recycling | View |
CTM | 342 | August 2012 | Method of Test for Surface Skid Resistance with the California Portable Skid Tester | Skid | 7/10/2017 | Roadway/Bridge Surface | View | |
AASHTO | T | 335 | 09r13 | Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate | Percent of Crushed Particles | 10/3/2017 | Aggregate | View |
AASHTO | T | 104 | 99r16 | Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate | Soundness | 10/5/2017 | Aggregate | View |
ASTM | D | 4791 | 10 | Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) | Flat and Elongated Particles | 10/12/2017 | Aggregate | View |
CTM | 386 | 14 | Method of Test for Determining Foaming Characteristics of Hot Bitumen | WMA | 10/30/2017 | Warm Mix Asphalt Technology | View |