Search Test Methods
Use this page to search for test methods that are currently supported in DIME. Enter part of the test method name, number or standard (ASTM, CTM, etc.) to filter the results. If you do not find a test method and you would like it to be added to DIME, please contact your METS Representative.
Please enter search terms to find matching test methods implemented in DIME. Terms such as "ASTM C39", "C39", "compressive strength" are acceptable. You can use the advanced search function if you wish to perform a refined search.
Test Org | Test Prefix | Test Number | Version | Test Name | Part | Date Added | Material Type | Sample Card |
---|---|---|---|---|---|---|---|---|
AASHTO | T | 209 | 22 | Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures | Maximum Specific Gravity | 2/21/2023 | Aggregate Reclaimed Asphalt Pavement Hot Mix Asphalt Partial Depth Recycling | View |
AASHTO | T | 30 | 19 | Standard Method of Test for Mechanical Analysis of Extracted Aggregate | Mechanical Analysis | 1/30/2020 | Reclaimed Asphalt Pavement Aggregate Hot Mix Asphalt | View |
AASHTO | T | 166 | 16 | Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens | Method A | 2/19/2020 | Hot Mix Asphalt | View |
ASTM | D | 522 | 17 | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings | Method B | 8/2/2018 | Paint | View |
ASTM | D | 562 | 14 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer | Method B | 8/3/2018 | Paint | View |
CTM | 308 | August 2010 | Method of Test for Determining Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt | Method B | 6/24/2019 | Hot Mix Asphalt | View | |
AASHTO | T | 312 | 14 | Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor | Method of Compaction | 5/5/2017 | Hot Mix Asphalt Partial Depth Recycling | View |
AASHTO | M | 247 | 22 | Glass Beads Used in Pavement Markings | Moisture | 3/11/2024 | Glass Beads | View |
AASHTO | T | 329 | 13 | Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method | Moisture Content | 5/4/2017 | Hot Mix Asphalt Partial Depth Recycling | View |
AASHTO | T | 283 | 14 | Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage | Moisture Content | 6/2/2017 | Hot Mix Asphalt Partial Depth Recycling | View |
CTM | 371 | January 2005 | Method of Test for Resistance of Compacted Bituminous Mixture to Moisture Induced Damage | Moisture Content | 1/31/2020 | Hot Mix Asphalt | View | |
AASHTO | T | 350 | 19 | Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) | Multiple Stress Creep Recovery | 6/17/2020 | Asphalt Binder | View |
CTM | 670 | December 2013 | Method of Tests for Mechanical and Welded Reinforcing Steel Splices | Necking | 1/5/2015 | SMTL TM5 - Couplers SMTL TM5 - Welded Hoops | View | |
CTM | 435 | 21 | Method of Test for Two-Component, Type A and AL Joint Seals | Notch | 9/18/2024 | Asphalt Plug Joint Seal | View | |
ASTM | D | 1640 | 14r22 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings (Method A) | organic coating | 12/21/2023 | Paint | View |
AASHTO | T | 201 | 15 | Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) | Original | 12/13/2016 | Asphalt Binder | View |
AASHTO | T | 59 | 22 | Standard Method of Test for Emulsified Asphalts | Particle Charge Cationic Emulsified (Sec. 8) | 8/25/2022 | Asphaltic Emulsion | View |
AASHTO | R | 28 | 16 | Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel | PAV | 3/31/2020 | Asphalt Binder | View |
AASHTO | T | 335 | 09r13 | Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate | Percent of Crushed Particles | 10/3/2017 | Aggregate | View |
ASTM | D | 3723 | 11 | Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing | Pigment Content | 5/11/2018 | Paint | View |
ASME | B | 1.2 | 83r17 | (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Pitch Diameter | 12/10/2021 | SMTL TM3 - Fastener Assembly | View |
ASME | B | 1.2 | 83r01 | (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Pitch Diameter | 8/16/2016 | SMTL TM3 - Fastener Assembly | View |
CTM | 204 | June 2010 | Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils | Plasticity Index | 1/1/2014 | Soil Aggregate | View | |
ASME | B | 1.2 | 83r17 | (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Plug Gage | 12/10/2021 | SMTL TM3 - Fastener Assembly | View |
ASME | B | 1.2 | 83r01 | (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 | Plug Gage | 9/6/2016 | SMTL TM3 - Fastener Assembly | View |