Sample Record
Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2018-04-24-32
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213087 Permit Numbers: 0916NCS0245 0917NDP0279 0917NRW0191 |
|---|---|
| DIST-CO-RTE-PM | 09-KER-14-16.3/17.1 |
| Award Date | 12/29/2016 |
| Closeout Date | 06/23/2021 |
| Work Description | Construct sidewalk, curb and gutter, as shown on the plans titled "Plans for Construction of Pedestrian Path Improvements on State Route 14 in Mojave, CA, Contract No. 16007" signed and stamped by Registered Civil Engineer Bryon A. Smith, RCE No. 61252.Notwithstanding General Provision #4, |
| Location Description | Mojave, Mojave |
| QA Service Level | 1 (Verified on 02/01/2018) |
Sample Information
| Sample Taken Date | 04/24/2018 | Sample Unique Key | 32 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/01/2018 |
| Sample type | Quality Assurance | A brief description of the sample | F1554 Gr 105 Anchor bolt assembly |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Distributor |
| First name of sampler or witnessed by | Dave | Last name of sampler or witnessed by | Flygare |
| Title of sampler | QC and Safety assistant | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Ensco | Transportation Laboratory (TL) Number | C719150 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-078-18 | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | M42681, DL17101378, 175125, DL12102282 | Nut Mfg. Lot Number(s) | 393694A, DL1710137801, 325719B, DL1210228201 |
| Washer Mfg. Lot Number(s) | 1017-672 | Bolt Specification | F1554 Gr105 |
| Bolt Length(s) | 3'-4" | Nut Specification | A194 Gr2H |
| Washer Specification | F436 | Finish | HDG |
| Diameter/Size | 1" | Bolt Mfg. Lot Number | 78641 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) |
Submitted Tests
Go to page:
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2018-04-24-32-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-24-32-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-24-32-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-24-32-4 ASTM A370-15 (Verified)
DIME Test ID: 2018-04-24-32-5 ASTM A370-15 (Verified)
DIME Test ID: 2018-04-24-32-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-24-32-11 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-12 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-13 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-14 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-15 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-24-32-16 ASTM E18-15 (Verified)
DIME Test ID: 2018-04-24-32-17 ASTM E18-15 (Verified)