DIME - Sample Record for DIME Sample ID 2021-10-04-50

DIME » All Projects » Project - DEA: ASCP » Sample 2021-10-04-50 » Sample Details

Sample Record

Owner Lab

Valero-NuStar PAT - Pittsburg

DIME Sample ID 2021-10-04-50

Project Information

Project Identifiers	Project ID: 44444 DEA: ASCP EFIS: ASCP
DIST-CO-RTE-PM	59---
Award Date	Not set
Closeout Date	Not set
Work Description	Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Information

Sample Taken Date	10/04/2021	Sample Unique Key	50
Will the laboratory/organization for which you are a member perform testing on this material sample?	No	Date that the sample was received by the laboratory/organization performing the testing	10/04/2021
Sample type	Quality Control	A brief description of the sample	Tank 0150
The quantity of what the sample constitutes	1 of 2	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	PAT	Last name of sampler or witnessed by	OPS
Title of sampler		Telephone number of sampler
Laboratory sample identification	6416-100421	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Pittsburg, CA	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Asphalt Binder	Performance Grade	PG 64-16
Modified	No	Lot number
Sublot number		Tank number
Time of sample		HMA Supplier
Certified Asphalt Supplier	Valero-NuStar PAT - Pittsburg CA	Multigrade	Yes
Multigrade Type	PG 64-16 / PG 64-10	Asphalt Binder Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-10-04-50-1	AASHTO T48-18: Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup	APART, Valero-NuStar PAT - Pittsburg	10/07/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload. Had to edit test date and add Observed Flash Point & Barometric Pressure
2021-10-04-50-2	AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer	APART, Valero-NuStar PAT - Pittsburg	10/07/2021	Brenda Mooney	Yes	12/06/2021	Submitted from ASCP bulk upload. Had to correct test date and add in all *tests except Average Visc
2021-10-04-50-3	AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	APART, Valero-NuStar PAT - Pittsburg	10/07/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload. Had to correct Test date and add in Phase Angle
2021-10-04-50-4	AASHTO T44-18: Standard Method of Test for Solubility of Bituminous Materials	APART, Valero-NuStar PAT - Pittsburg	10/07/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload.
2021-10-04-50-5	AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	APART, Valero-NuStar PAT - Pittsburg	10/07/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload.
2021-10-04-50-6	AASHTO T51-13: Standard Method of Test for Ductility of Asphalt Materials (Asphalt Binder)	APART, Valero-NuStar PAT - Pittsburg	10/07/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload. It is the average of 3 specimens, but when loaded from bulk upload, no opportunity to select # of beams
2021-10-04-50-7	AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)	APART, Valero-NuStar PAT - Pittsburg	10/07/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload.
2021-10-04-50-8	AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	APART, Valero-NuStar PAT - Pittsburg	10/08/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload.
2021-10-04-50-9	AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)	APART, Valero-NuStar PAT - Pittsburg	10/08/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload.
2021-10-04-50-10	AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)	APART, Valero-NuStar PAT - Pittsburg	10/08/2021	Brenda Mooney	Yes	10/22/2021	Submitted from ASCP bulk upload.

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-10-04-50-1 AASHTO T48-18 (Verified)
DIME Test ID: 2021-10-04-50-2 AASHTO T316-17 (Verified)
DIME Test ID: 2021-10-04-50-3 AASHTO T315-16 (Verified)
DIME Test ID: 2021-10-04-50-4 AASHTO T44-18 (Verified)
DIME Test ID: 2021-10-04-50-5 AASHTO T315-16 (Verified)
DIME Test ID: 2021-10-04-50-6 AASHTO T51-13 (Verified)
DIME Test ID: 2021-10-04-50-7 AASHTO T240-17 (Verified)
DIME Test ID: 2021-10-04-50-8 AASHTO T315-16 (Verified)
DIME Test ID: 2021-10-04-50-9 AASHTO T313-19 (Verified)
DIME Test ID: 2021-10-04-50-10 AASHTO T313-19 (Verified)