Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2024-09-04-62

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994947
DEA: 112T3644
EFIS: 1121000108
DIST-CO-RTE-PM11-SD-56-0.3/3.0
Award Date10/17/2023
Closeout DateNot set
Work DescriptionCONSTRUCT JPCP, HMA, RHMA-G, SIGNS, BARRIERS, LANDSCAPE, & ELECTRICAL.
Location DescriptionSAN DIEGO COUNTY IN SAN DIEGO FROM EL CAMINO REAL UNDERCROSSING TO 0.3 MILE WEST OF CARMEL VALLEY ROAD OVERCROSSING
QA Service Level1 (Verified on 01/22/2024)

Sample Information

Sample Taken Date09/04/2024 Sample Unique Key62
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/10/2024
Sample typeQuality Assurance A brief description of the samplePSUE
The quantity of what the sample constitutes12 boxes From where was the sample collectedSource
First name of sampler or witnessed byBen Last name of sampler or witnessed bySmith
Title of sampler Telephone number of sampler6193804522
Laboratory sample identification0908-PSU Linked DIME Sample ID2024-09-04-64
The fabricator/manufacturer/facility nameMartin Marietta Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number21218080SR MM

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2024-09-04-62-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory09/16/2024Daniel Smith
Yes
09/17/2024Complies - Target 7.50 %
2024-09-04-62-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/17/2024Daniel Smith
Yes
09/17/2024Complies Target 2.457 Tested 3 times (1)-2.425 (2)-2.456 (3)-2.413
2024-09-04-62-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory09/16/2024Daniel Smith
Yes
09/17/2024Does not Comply Tested at 2 Weights 4550g Failed at 6.0 % and 4800g at 6.3%
2024-09-04-62-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory09/16/2024Daniel Smith
Yes
09/17/2024Does not Comply - Tested at 2 different weights 4550g at 6.0% and 4800g 6.3%
2024-09-04-62-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith, CT D11 - District 11 Materials Laboratory09/25/2024Daniel Smith
Yes
09/26/2024Does not Comply DRY < 100
2024-09-04-62-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory09/24/2024Daniel Smith
Yes
09/26/2024Complies Target - < 12.7 mm

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-09-04-62-1 AASHTO T308-10 (Verified)
DIME Test ID: 2024-09-04-62-2 AASHTO T209-12 (Verified)
DIME Test ID: 2024-09-04-62-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-09-04-62-4 AASHTO T269-14 (Verified)
DIME Test ID: 2024-09-04-62-5 AASHTO T283-14 (Verified)
DIME Test ID: 2024-09-04-62-6 CTM 389-19 (Verified)