Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-08-12-29
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994147 DEA: 120R4104 EFIS: 1218000090 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-1-17.4/21.5 |
| Award Date | 09/27/2022 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC AND PLACE RHMA-G. |
| Location Description | ORANGE COUNTY IN NEWPORT BEACH FROM JAMBOREE ROAD TO SANTA ANA RIVER BRIDGE |
| QA Service Level | 1 (Verified on 06/28/2023) |
Sample Information
| Sample Taken Date | 08/12/2024 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/14/2024 |
| Sample type | Verification | A brief description of the sample | PSUE 3/4" RHMA-G-SP 0.25% EVO |
| The quantity of what the sample constitutes | 3 Bags of Comb. Agg, 1 Bag each of Scrap & Hi-Nat | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | R J Noble Orange | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0399G-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | R J Noble Orange | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0014, 91-33-0027 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at R J Noble- Orange | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | 49R003ARSPWEO | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2024-08-12-29-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 08/17/2024 | Satish Jain | No | Combined Virgin Aggregate Gradation | Info | |
| 2024-08-12-29-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Seige M, CT D08 - Fontana Southern Regional Laboratory | 08/16/2024 | Satish Jain | No | Info | ||
| 2024-08-12-29-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 08/16/2024 | Satish Jain | No | Info | ||
| 2024-08-12-29-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 08/19/2024 | Satish Jain | No | Info | ||
| 2024-08-12-29-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Ronica B, CT D08 - Fontana Southern Regional Laboratory | 08/16/2024 | Satish Jain | No | Info | ||
| 2024-08-12-29-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/17/2024 | Satish Jain | No | Info | ||
| 2024-08-12-29-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/17/2024 | Satish Jain | No | Info | ||
| 2024-08-12-29-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/17/2024 | Satish Jain | No | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-08-12-29-1 AASHTO T27-14
DIME Test ID: 2024-08-12-29-2 AASHTO T84-14
DIME Test ID: 2024-08-12-29-3 AASHTO T85-13
DIME Test ID: 2024-08-12-29-4 AASHTO T96-02r10
DIME Test ID: 2024-08-12-29-5 AASHTO T176-08
DIME Test ID: 2024-08-12-29-6 AASHTO T304-11
DIME Test ID: 2024-08-12-29-7 AASHTO T335-09r13
DIME Test ID: 2024-08-12-29-8 ASTM D4791-10