Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-07-31-17
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994592 DEA: 081J7004 EFIS: 0818000097 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-10-R59.3/R59.5 |
| Award Date | 09/07/2023 |
| Closeout Date | 04/30/2025 |
| Work Description | HIGH SPEED WEIGH IN MOTION SYSTEM, JPCP,HMA, AND MODIFYING CMS SYSTEM. |
| Location Description | RIVERSIDE COUNTY IN COACHELLA FROM 0.4 MILE TO 0.6 MILE EAST OF DILLON ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
| Sample Taken Date | 07/31/2024 | Sample Unique Key | 17 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/01/2024 |
| Sample type | Verification | A brief description of the sample | PSUE 1/2" HMA-A-SP R25 0.5% LAS |
| The quantity of what the sample constitutes | 4 Bags of Comb. Agg, 12 Bags of Bin Treated 3 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Granite | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0362A-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Granite Construction-Desert Hot spring | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0072 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt cut at Granite Construction-Desert Hot spring | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | 3922 | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2024-07-31-17-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 08/06/2024 | 08/22/2024 | No | Combined Virgin Aggregate Gradation | |||
| 2024-07-31-17-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 08/06/2024 | 08/22/2024 | No | ||||
| 2024-07-31-17-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 08/03/2024 | 08/22/2024 | No | ||||
| 2024-07-31-17-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 08/07/2024 | 08/22/2024 | No | ||||
| 2024-07-31-17-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 08/07/2024 | 08/22/2024 | No | ||||
| 2024-07-31-17-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/07/2024 | 08/22/2024 | No | ||||
| 2024-07-31-17-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/07/2024 | 08/22/2024 | No | ||||
| 2024-07-31-17-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/07/2024 | 08/22/2024 | No | ||||
| 2024-07-31-17-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/08/2024 | 08/22/2024 | No | Rap Gradation After Ignition | |||
| 2024-07-31-17-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 08/08/2024 | 08/22/2024 | No | Combined Aggregate Gradation W/Rap Gradation Correlation Factors |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-07-31-17-1 AASHTO T27-14
DIME Test ID: 2024-07-31-17-2 AASHTO T84-14
DIME Test ID: 2024-07-31-17-3 AASHTO T85-13
DIME Test ID: 2024-07-31-17-4 AASHTO T96-02r10
DIME Test ID: 2024-07-31-17-5 AASHTO T176-08
DIME Test ID: 2024-07-31-17-6 AASHTO T304-11
DIME Test ID: 2024-07-31-17-7 AASHTO T335-09r13
DIME Test ID: 2024-07-31-17-8 ASTM D4791-10
DIME Test ID: 2024-07-31-17-9 CTM 202-November 2011
DIME Test ID: 2024-07-31-17-10 CTM 202-November 2011