Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-07-25-35
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 995060 DEA: 081J2604 EFIS: 0818000012 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-215-R13.5/R19.5 |
| Award Date | 01/10/2024 |
| Closeout Date | Not set |
| Work Description | RHMA, REPLACE AC SURFACING, ROCK BLANKET, AND COMPOST. |
| Location Description | RIVERSIDE COUNTY IN MURRIETA AND MENIFEE FROM 1.0 MILE NORTH OF CLINTON KEITH ROAD TO 1.0 MILE NORTH OF NEWPORT ROAD |
| QA Service Level | 1 (Verified on 08/15/2023) |
Sample Information
| Sample Taken Date | 07/25/2024 | Sample Unique Key | 35 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/26/2024 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP r25 0.5% LAS |
| The quantity of what the sample constitutes | 6 Bags of Coldfeed Agg, 2 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Kalpesh | Last name of sampler or witnessed by | Patel |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0351A-24 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Martin Mariett(CCA) Lake Elsinore | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0098 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Martin Marietta CCA Lake Elsinore Plant | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | 53417195 | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2024-07-25-35-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/R.G, CT D08 - Fontana Southern Regional Laboratory | 08/03/2024 | Satish Jain | No | Combined Virgin Aggregate Gradation | Info | |
| 2024-07-25-35-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 08/03/2024 | Satish Jain | No | Info | ||
| 2024-07-25-35-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 08/02/2024 | Satish Jain | No | Info | ||
| 2024-07-25-35-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 08/03/2024 | Satish Jain | No | Info | ||
| 2024-07-25-35-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Robert Guillen, CT D08 - Fontana Southern Regional Laboratory | 08/06/2024 | Satish Jain | No | Info | ||
| 2024-07-25-35-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/08/2024 | Satish Jain | No | Info | ||
| 2024-07-25-35-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/08/2024 | Satish Jain | No | Info | ||
| 2024-07-25-35-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/08/2024 | Satish Jain | No | Info | ||
| 2024-07-25-35-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/05/2024 | Satish Jain | No | Rap Gradation After Ignition | Info | |
| 2024-07-25-35-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/R.G, CT D08 - Fontana Southern Regional Laboratory | 08/08/2024 | Satish Jain | No | Comb. Virgin Agg, Gradation W/Rap Gradation Correlation Factors | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-07-25-35-1 AASHTO T27-14
DIME Test ID: 2024-07-25-35-2 AASHTO T84-14
DIME Test ID: 2024-07-25-35-3 AASHTO T85-13
DIME Test ID: 2024-07-25-35-4 AASHTO T96-02r10
DIME Test ID: 2024-07-25-35-5 AASHTO T176-08
DIME Test ID: 2024-07-25-35-6 AASHTO T304-11
DIME Test ID: 2024-07-25-35-7 AASHTO T335-09r13
DIME Test ID: 2024-07-25-35-8 ASTM D4791-10
DIME Test ID: 2024-07-25-35-9 CTM 202-November 2011
DIME Test ID: 2024-07-25-35-10 CTM 202-November 2011