DIME » All Projects » Project - DEA: 024H0204 » Sample 2024-06-06-126 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2024-06-06-126

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 995054
DEA: 024H0204
EFIS: 0218000069
DIST-CO-RTE-PM02-TEH-36-20.0/39.7
Award Date10/23/2023
Closeout Date07/03/2025
Work DescriptionPLACE RHMA AND HMA, CORRECT SEGMENTS, AND REPLACE AC SURFACING.
Location DescriptionTEHAMA COUNTY NEAR RED BLUFF FROM 0.8 MILE EAST OF SALT CREEK BRIDGE TO BAKER ROAD
QA Service Level1 (Verified on 08/14/2023)

Sample Information

Sample Taken Date06/06/2024 Sample Unique Key126
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/06/2024
Sample typeProduction Start-Up A brief description of the sample16 boxes of Lime Treated 3/4-inch RHMA-G (PG 64-16 CR)
The quantity of what the sample constitutesProduction Start Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79568 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis — Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number876860
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2024-06-06-126-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Sean Mcwithey, CT D02 - Redding Northern Regional Laboratory06/07/202407/23/2024
Yes
03/07/2025Gmm=2.434Public - Test Data Visible
2024-06-06-126-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory06/11/202407/23/2024
Yes
03/07/2025Gmb=2.358; 150-mm SGC specimens compacted at 152°C with 825 kPa for 100 Gyrations and a 30-minute hold.Public - Test Data Visible
2024-06-06-126-4AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Josh Murphy , CT D02 - Redding Northern Regional Laboratory07/23/202407/23/2024
Yes
03/07/2025S1=125, S2=122, TSR=97%Public - Test Data Visible
2024-06-06-126-5AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/22/202407/23/2024
Yes
03/07/2025Pb=7.24%Public - Test Data Visible
2024-06-06-126-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltJoe Mishoe, CT D02 - Redding Northern Regional Laboratory06/19/202403/07/2025
Yes
03/07/2025Nf>15000, SIP>15000Public - Test Data Visible
2024-06-06-126-7AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory03/04/202503/04/2025
Yes
03/07/2025AASHTO T 269: Pa=3.1%; MS-2: VMA=17.2%, VFA=81.9%, DP=0.7Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-06-06-126-1 AASHTO T209-12 (Verified)
DIME Test ID: 2024-06-06-126-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-06-06-126-4 AASHTO T283-14 (Verified)
DIME Test ID: 2024-06-06-126-5 AASHTO T308-10 (Verified)
DIME Test ID: 2024-06-06-126-6 CTM 389-19 (Verified)
DIME Test ID: 2024-06-06-126-7 AASHTO T269-14 (Verified)