Sample Record

DIME Sample ID 2024-06-10-85

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 995031
DEA: 023H82U4
EFIS: 0223000011
DIST-CO-RTE-PM02-LAS-44-0.0/37.2
Award Date10/24/2023
Closeout Date07/03/2025
Work DescriptionREPLACE AC SURFACING, PLACE RHMA, HMA, THERMOPLASTIC TRAFFIC STRIPE.
Location DescriptionLASSEN COUNTY ABOUT 9 MILES EAST OF OLD STATION FROM SHASTA COUNTY LINE TO ROUTE 36
QA Service Level1 (Verified on 08/10/2023)

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

Sample Information

Sample Taken Date06/10/2024 Sample Unique Key85
Date that the sample was received by the laboratory/organization performing the testing01/30/2024 Sample typeProduction Start-Up
A brief description of the sample16 boxes of Lime Treated 3/4-inch type A HMA The quantity of what the sample constitutesProduction Start-Up Evaluation
From where was the sample collectedManufacturer First name of sampler or witnessed byBrandon
Last name of sampler or witnessed byWhite Title of samplerTET
Telephone number of sampler Laboratory sample identificationD79572
Linked DIME Sample ID The fabricator/manufacturer/facility nameHat Creek - Ward Lake
Transportation Laboratory (TL) Number692887 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2024-06-10-85-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Sean McWhithey, CT D02 - Redding Northern Regional Laboratory07/26/202403/20/2025
Yes
03/24/2025Pb=5.70%Public - Test Data Visible
2024-06-10-85-2CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltJoe Mishoe, CT D02 - Redding Northern Regional Laboratory06/17/202403/24/2025
Yes
03/24/2025CT 360: SA=0.3g/cm²; CT 389: Nf>15000, SIP>15000Public - Test Data Visible
2024-06-10-85-3AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory06/11/202406/18/2024
Yes
03/24/2025Gmm=2.479Public - Test Data Visible
2024-06-10-85-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory06/11/202406/18/2024
Yes
03/24/2025Gmb=2.376Public - Test Data Visible
2024-06-10-85-7AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Murphy, CT D02 - Redding Northern Regional Laboratory06/11/202403/21/2025
Yes
03/24/2025AASHTO T 269: Pa=4.2%; MS-2: VMA=14.3%, VFA=70.8%, DP=1.4Public - Test Data Visible
2024-06-10-85-8AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Josh Murphy, CT D02 - Redding Northern Regional Laboratory06/18/202403/21/2025
Yes
03/24/2025S1=155psi, S2=152psi, TSR=98%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-06-10-85-1 AASHTO T308-10 (Verified)
DIME Test ID: 2024-06-10-85-2 CTM 389-19 (Verified)
DIME Test ID: 2024-06-10-85-3 AASHTO T209-12 (Verified)
DIME Test ID: 2024-06-10-85-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-06-10-85-7 AASHTO T269-14 (Verified)
DIME Test ID: 2024-06-10-85-8 AASHTO T283-14 (Verified)