DIME » All Projects » Project - DEA: 11430254 » Sample 2024-06-04-48 » Sample Details

Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2024-06-04-48

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994331
DEA: 11430254
EFIS: 1118000079
DIST-CO-RTE-PM11-SD-52-5.1/9.0
Award Date12/21/2023
Closeout DateNot set
Work DescriptionCONST AUX LANE, COMPACTION GROUTING, RHMA, LANDSCAPE, & ELECTRICAL.
Location DescriptionSAN DIEGO COUNTY IN SAN DIEGO FROM 0.4 MILE WEST OF CONVOY STREET OVERCROSSING TO 0.3 MILE EAST OF SANTO ROAD OVERCROSSING
QA Service Level1 (Verified on 02/05/2024)

Sample Information

Sample Taken Date06/04/2024 Sample Unique Key48
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/04/2024
Sample typeQuality Assurance A brief description of the sampleHMA
The quantity of what the sample constitutes3 bags From where was the sample collectedSource
First name of sampler or witnessed byBen Last name of sampler or witnessed bySmith
Title of sampler Telephone number of sampler619 380 4522
Laboratory sample identification0801-JMF Linked DIME Sample ID2024-06-04-47
The fabricator/manufacturer/facility nameMartin Marietta Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-37-0036
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedPlant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2024-06-04-48-1THIS TEST HAS BEEN SUPERSEDED.
AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)		Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/10/2024Mohammad Abbassi
Yes
06/11/2024THIS TEST HAS BEEN SUPERSEDED.
Complies
2024-06-04-48-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/11/2024Mohammad Abbassi
Yes
06/11/2024Complies
2024-06-04-48-3ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/11/2024Mohammad Abbassi
Yes
06/11/2024Complies
2024-06-04-48-4AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/07/2024Mohammad Abbassi
Yes
06/11/2024Complies
2024-06-04-48-5CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/07/2024Mohammad Abbassi
Yes
06/11/2024Complies
2024-06-04-48-6THIS TEST HAS BEEN SUPERSEDED.
AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)		Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/11/2024Mohammad Abbassi
Yes
06/11/2024THIS TEST HAS BEEN SUPERSEDED.
Complies
2024-06-04-48-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/11/2024Mohammad Abbassi
Yes
06/11/2024Complies
2024-06-04-48-8AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/10/2024Mohammad Abbassi
Yes
06/11/2024Complies
2024-06-04-48-9THIS TEST HAS BEEN SUPERSEDED.
AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)		Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/11/2024Mohammad Abbassi
Yes
06/11/2024THIS TEST HAS BEEN SUPERSEDED.
Fail
2024-06-04-48-10AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory06/10/2024Mohammad Abbassi
Yes
06/11/2024Complies
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-06-04-48-1 AASHTO T27-14 (Verified)
DIME Test ID: 2024-06-04-48-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2024-06-04-48-3 ASTM D4791-10 (Verified)
DIME Test ID: 2024-06-04-48-4 AASHTO T176-08 (Verified)
DIME Test ID: 2024-06-04-48-5 CTM 204-June 2010 (Verified)
DIME Test ID: 2024-06-04-48-6 AASHTO T84-14 (Verified)
DIME Test ID: 2024-06-04-48-7 AASHTO T85-13 (Verified)
DIME Test ID: 2024-06-04-48-8 AASHTO T96-02r10 (Verified)
DIME Test ID: 2024-06-04-48-9 AASHTO T304-11 (Verified)
DIME Test ID: 2024-06-04-48-10 AASHTO T30-19 (Verified)
DIME Test ID: 2024-06-04-48-11 AASHTO T209-12 (Verified)
DIME Test ID: 2024-06-04-48-12 AASHTO T304-11 (Verified)
DIME Test ID: 2024-06-04-48-13 AASHTO T84-14 (Verified)
DIME Test ID: 2024-06-04-48-14 AASHTO T27-14 (Verified)
DIME Test ID: 2024-06-04-48-15 AASHTO T27-14 (Verified)